La5 ict-topic-5-programming

5.0 PROGRAMMING
1
LESSON 1
PROGRAM AND PROGRAMMING
PROGRAM
A computer program is a series of organised instructions that directs a
computer to perform tasks. Without programs, computers are useless.
A program is like a recipe. It contains
a list of variables (called ingredients)
and a list of statements (called
directions) that tell the computer what
to do with the variables.
Like a recipe, a program can be
written in different programming
languages which may express the
steps differently according to the
programming language syntax, but
deliver the same end result.
PROGRAMMING
Programming is a creation of a set of
commands or instructions which directs a
computer in carrying out a task.
Later these commands or instructions will
be compiled and/or interpreted and then
transformed to executable instructions that
a computer or electronic device can execute
or run.

5.0 PROGRAMMING
2
PROGRAMMING LANGUAGE
A programming language is a set of words, symbols
and codes that enables humans to communicate
with computers.
It is a language used for writing computer
programs, that direct a computer to perform
computation and to organise the flow of control
between mechanical devices.
EXAMPLES PROGRAMMING LANGUAGE
Hundreds of programming languages exist today.
Each language has its own standard or rules for
writing the commands and/or instructions.
Examples of programming languages are:
BASIC (Beginner s All Purpose Symbolic
Instruction Code)
Pascal
C
Smalltalk.
EXT : CAREER IN PROGRAMMING
A programmer is someone who writes computer programs. One who adopts
and practices a formal approach to programming is sometimes also referred
to as a programmer analyst, computer scientist, software engineer and
software analyst.
A programmer analyst designs computer programs besides writing them.
A computer scientist is a generic or broad term for a professional with
expertise in computer software.
These different job titles are quite subjective as
different companies may define them differently.
Professional programmers may work in corporate
IT departments, software houses and service
companies.
Sometimes professional programmers work for
consulting companies and their work often takes
them to their client s workplace.

5.0 PROGRAMMING
3
LESSON 2
GENERATIONS OF PROGRAMMING LANGUAGE
A low-level programming language is a programming language that provides
little or no abstraction from computer s microprocessor.
A high-level programming language is a programming language that is more
abstract, easier to use, and more portable across platforms.
LEVELS OF PROGRAMMING LANGUAGE

5.0 PROGRAMMING
4
FIRST GENERATION OF PROGRAMMING LANGUAGE
The first generation of programming
language, or 1GL, is machine language.
Machine language is a set of instructions
and data that a computer's central
processing unit can execute directly.
Machine language statements are written
in binary code, and each statement
corresponds to one machine action.
SECOND GENERATION PROGRAMMING LANGUAGE
The second generation programming language, or
2GL, is assembly language. Assembly language is the
human-readable notation for the machine language
used to control specific computer operations.
An assembly language programmer writes instructions
using symbolic instruction codes that are meaningful
abbreviations or mnemonics.
An assembler is a program that translates assembly
language into machine language.
Since assembly language consist of human-readable
abbreviations, the assembler must first convert assembly language into
machine-readable language before the computer can readily understand its
instructions.

5.0 PROGRAMMING
5
THIRD GENERATION PROGRAMMING LANGUAGE
The third generation of programming language, 3GL, or procedural language
uses a series of English-like words, that are closer to human language,
to write instructions.
High-level programming languages make complex programming simpler and
easier to read, write and maintain.Programs written in a high-level
programming language must be translated into machine language by a
compiler or interpreter.
PASCAL, FORTRAN, BASIC, COBOL, C and C++ are examples of third
generation programming languages.
FOURTH GENERATION PROGRAMMING LANGUAGE
The fourth generation programming language or non-
procedural language, often abbreviated as 4GL,
enables users to access data in a database.
A very high-level programming language is often
referred to as goal-oriented programming language
because it is usually limited to a very specific
application and it might use syntax that is never used
in other programming languages.

5.0 PROGRAMMING
6
SQL, NOMAD and FOCUS are examples of fourth generation programming
languages.
FIFTH GENERATION PROGRAMMING LANGUAGE
The fifth generation programming language or visual programming
language, is also known as natural language.
Provides a visual or graphical interface, called a visual programming
environment, for creating source codes.
Fifth generation programming allows people to interact with computers
without needing any specialised knowledge.
People can talk to computers and the voice recognition systems can convert
spoken sounds into written words, but these systems do not understand
what they are writing; they simply take dictation.
Prolog and Mercury are the best known fifth-generation languages.

5.0 PROGRAMMING
7
EXT : OPEN PROGRAMMING LANGUAGE
The Open Programming Language (OPL) is
an embedded programming language
found in portable devices that run the
Symbian Operating System.
For example mobile telephones and PDAs.
OPL is an interpreted language that is
analogous to BASIC.
In the early years, before the computer
was invented, there are several inventions
of counting machines.

5.0 PROGRAMMING
8
LESSON 3
PROGRAMING APPROACHES
STRUCTURED PROGRAMMING EDUCATION
Structured programming often uses a top-down design model where
developers map out the overall program structure into separate subsections
from top to bottom.
In the top-down design model, programs are drawn as rectangles. A top-
down design means that the whole program is broken down into smaller
sections that are known as modules.A program may have a module or
several modules.
Structured programming is beneficial for organising and coding computer
programs which employ a hierarchy of modules. This means that control is
passed downwards only through the hierarchy.
Examples of structured programming languages include Ada, Pascal and
Fortran.

5.0 PROGRAMMING
9
OBJECT-ORIENTED PROGRAMMING
The object-oriented approach refers to a special type of programming
approach that combines data with functions to create objects.
In an object-oriented program, the object have relationships with one
another.
One of the earliest OOP languages is
Smalltalk. Java, Visual Basic and C++
are examples of popular OOP
languages.
DIFFERENCE BETWEEN STRUCTURED AND OBJECT
ORIENTED PROGRAMMING
Structured programming often uses a top-down design model.
The object-oriented programming approach uses objects.

5.0 PROGRAMMING
10
LESSON 4
TRANSLATOR
Sometimes two people cannot understand each other because they don t
speak the same language. So they need the help of a third person who
understands both languages. This third person is known as a translator.
All software packages or programs are written in high-level languages, for
example, C++, Visual Basic and Java.
However, in order for the computer to be able to carry out the instructions,
the high-level languages must be translated into machine language before
the computer can understand and execute the instructions in the program.
The translation of high level languages to machine language is performed by
a translator.
PROGRAM
Have you ever wondered how your computer runs your favourite software?
Your favourite software is a program that consists of several instructions
that perform its operation.
A programmer will write a source code which consists of the instructions
needed to run a program. Then the compiler or interpreter with assembler
will translates the source code into machine language which is made of a
sequence of bits (eg. 01100011).
The computer will load the machine code and run the program.

5.0 PROGRAMMING
11
ASSEMBLER
An assembler is a computer program for translating assembly language
essentially, a mnemonic representation of machine language into machine
language.
For example in intel 80836, the assembly language for the no operation
command is NOP and its machine code representation is 10010000.
Example of assemblers are MACRO-80 Assembler and Microsoft MASM.
INTERPRETER
Interpreter is used to interpret and execute
program directly from its source without
compiling it first. The source code of an
interpreted language is interpreted and executed
in real time when the user execute it.
The interpreter will read each codes converts it to
machine code and executes it line by line until the
end of the program.
Examples of interpreter-based language are
BASIC, Logo and Smalltalk.

5.0 PROGRAMMING
12
COMPILER
The source code (in text format) will be converted into machine code which
is a file consisting of binary machine code that can be executed on a
computer. If the compiler encounters any errors, it records them in the
program-listing file.
When a user wants to run the program, the object program is loaded into
the memory of the computer and the program instructions begin executing.
A compiled code generally runs faster than programs based on interpreted
language. Several programming languages like C++, Pascal and COBOL
used compilers as their translators.

5.0 PROGRAMMING
13
LESSON 5
HOW TO INSTALL VISUAL BASIC 6.0
VISUAL BASIC 6.0 INSTALLATION
Microsoft Visual Basic 6.0 was designed to be easy to learn and use. The
language not only allows programmers to easily create simple GUI
applications, but also has the flexibility to develop fairly complex applications
as well.
Programming in Microsoft Visual Basic 6.0 is a combination of visually
arranging components or controls on a form. Hence a simple program can be
created without the programmer having to write many lines of code.
VISUAL BASIC 6.0 FEATURES
Microsoft Visual Basic is fast and easy with intuitive tools that enable you to
rapidly build your own Windows applications. You can use Microsoft Visual
Basic to develop programs such as games, calculator, phonebook database
and lots more.
The word Visual refers to the technique used to build the Graphical User
Interface (GUI). Visual Basic features an easy drag and drop method to
produce an interactive Graphical User Interface (GUI) for your program.
The Basic part refers to the BASIC (Beginners All-Purpose Symbolic
Instruction Code) language, a high level programming language develop by
Microsoft.

5.0 PROGRAMMING
14
VISUAL BASIC 6.0 FEATURES
Among the main features of Visual Basic are
drag and drop user interface, data access
features, ActiveX technologies and internet
capabilities. Drag and drop user interface
allows you to instantly create an interactive
user interface for your software without dozens
of codes.
Data access features allow your application to
access information from a database such as a
telephone book program.
ActiveX technologies allow you to make use of the functionality provided by
other applications.
Internet capabilities allow your program to interactively utilise the Internet.

5.0 PROGRAMMING
15
LESSON 6
BASIC ELEMENT IN PROGRAMMING
5 Basic elements in programming.
1. Constant.
2. Variable.
3. Data Type.
4. Operators.
5. Control Structures.
CONSTANTS AND VARIABLES
Constants
Constant is a data container that stores information. The value will never
change (remains constant) at any time during the course of a program.
Declare is the official term used in programming to announce to the program
the condition of statement in programming.
Variables
Variable is a data container that stores information. The value inside may
change at any time during the course of a program.

5.0 PROGRAMMING
16
DATA TYPES, OPERATOR AND CONTROL
STRUCTURES

5.0 PROGRAMMING
17
LESSON 7
THE DIFFERENCES BETWEEN ETHICS AND LAW
CONSTANTS AND VARIABLES
Constant is a virtual data container that stores information. The value will
never change (remains constant) at any time during the course of a
program.
Variables is a virtual data container that stores information. The value
inside may change at any time during the course of a program.
DIFFERENCES BETWEEN CONSTANTS AND
VARIABLES

5.0 PROGRAMMING
19
LESSON 8
RIGHTS DATA TYPES
DATA EXAMPLES FOR DIFFERENT DATA TYPES
Data type determines the type
of data a variable can store,
for example a number or a
character. Examples of data
types are integer, double,
string and boolean.
DATA EXAMPLES FOR DIFFERENT DATA TYPES
Integer
Integer data type contains any whole number value that does not have any
fractional part.
This is how we declare an integer type constant in Visual Basic statement.
This is how we declare an integer type variable in Visual Basic statement.
Double
Any number value that may and could contain a fractional part.
This is how we declare a double type constant in Visual Basic statement.
This is how we declare a double type variable in Visual Basic statement.

5.0 PROGRAMMING
20
String
Any value that contains a sequence of characters.
This is how we declare string type constant in Visual Basic statement.
This is how we declare string type variable in Visual Basic statement.
Boolean
Boolean type consists either a True or False value. Programmers usually use
it to store status.
This is how we declare a boolean type constant in Visual Basic statement.
This is how we declare a boolean type variable in Visual Basic statement.

5.0 PROGRAMMING
21
OTHER DATA TYPES

5.0 PROGRAMMING
22
LESSON 9
MATHEMATICAL AND LOGICAL OPERATORS
MATHEMATICAL, RELATIONAL AND LOGICAL
OPERATORS
Operator is a symbol or notation that tells a computer to perform certain
actions or operations.
An example: the plus (+) notation will tell the computer to perform the
"add" operation.
Let's look at some examples of Mathematical Operators.

5.0 PROGRAMMING
23
Let's look at some examples of Relational Operators.

5.0 PROGRAMMING
24
Let's look at some examples of Logical Operators.
FUNCTION OF MATHEMATICAL OPERATORS
Mathematical operators are notations that tell the
computer to perform mathematical operations.
FUNCTIONS OF RELATIONAL OPERATORS
Relational operators perform comparison between
two elements.
They return an element of logical 1 (True) where the relation is true, and
element of logical 0 (False) where the relation is false.
The diagram shows some common relational operators and their expression.

5.0 PROGRAMMING
25
Let s understand a relational operation with the following examples.
In this expression, A >= B is
used to test if the value of left
expression (A) is greater than
or equal to that of the right
expression (B).
If the conditions are met, then
the program will return a logical
1 and proceed to print "A is
greater than or equal to B" else
it will return a logical 0 and
proceed to print "A is less than
B".
FUNCTIONS OF LOGICAL OPERATORS
Logical operators are notations that tell the computer to perform logical
operations.
Examples of Logical operation are: AND, OR, and NOT.
Logical operator compares 2 conditions and returns a TRUE or FALSE value.

5.0 PROGRAMMING
26
AND operator
The diagram shows a truth table of AND operator.
Notice that truth value of X AND Y is True ( 1 ) if
only both X and Y are True ( 1 ).
Else it is false ( 0 )
OR operator
The diagram shows a truth table of OR operator.
Notice that truth value of X OR Y is only True ( 1 )
if either X or Y are True ( 1 ) or both X and Y are
true ( 1 )
Else it is false ( 0 )
NOT operator
The diagram shows the truth table of NOT
operator NOT X is the negation of X, it is
essentially the 1's complement operation.
Notice that truth value of NOT X is True
( 1 ) when X is False and vice versa.

5.0 PROGRAMMING
27
DIFFERENCES IN MATHEMATICAL AND LOGICAL
OPERATORS
As we have learned, there are some
differences between mathematical,
relational and logical operators.
Function :
Mathematical operators perform mathematical
operations such as plus or substract.
Relational operators perform element-by-element
comparisons between two
arrays.
Logical operators perform logical operations such as
checking the condition of two Boolean values.

5.0 PROGRAMMING
28
Symbols :
These operators have their own symbols based on the programming
language.
EQUALITY OPERATORS
The equality determine an operand equal to or
not equal to another operand.
Remember we must use "=" and not "<>" when
testing if two primitive values are equal in
Microsoft Visual Basic 6.0.

5.0 PROGRAMMING
29
LESSON 10
PSEUDO CODES
Pseudo code is text only sentences that
describe the logic and program flow of a
computer program. Pseudo code
esembles plain English.
It usually does not have any specific
programming language syntax and
grammar.
Pseudo code is directly linked to the
computer codes because each pseudo
code statement can often be converted
into the programming language virtually
line by line.
There are no set rules for writing pseudo
code.
A programmer can have his or her personalised pseudo code.
He or she must use consistent language and syntax in the pseudo code, so
that he or she can understand it at a later stage.
AN EXAMPLE PROGRAM BASED ON A PSEUDO CODE

5.0 PROGRAMMING
30
EXT : STANDARDS OF GOOD PSEUDO CODE
Pseudo-Code is simply a numbered list of instructions to perform some task.
In this course we will enforce three standards for good pseudo code
Number each instruction. This is to enforce the
notion of an ordered sequence of the operations.
Furthermore we introduce a dot notation (e.g. 3.1
come after 3 but before 4) to number subordinate
operations for conditional and iterative operations
Each instruction should be unambiguous and
effectively computable.
Completeness. Nothing is left out.
Pseudo-code is best understood by looking at examples.
Each example below demonstrates one of the control structures used in
algorithms : sequential operations, conditional operations, and
iterative operations.
We also list all variables used at the end of the pseudo-code.

5.0 PROGRAMMING
31
Example:
Computing discount:
Pseudo-code:
Computing the final price of an item
after figuring in discount.
Note the three types of
instructions:
input (request),
process/calculate (=) and
output (print)

5.0 PROGRAMMING
32
LESSON 11
FLOW CHART
Let s identify some of the main elements in the flow chart. We have five
main elements in a flow chart.
Terminator shows the beginning or end
of a program.
Flowline and arrowhead use to connect
symbols and indicate the sequences of
operation.
Input or output shows either an input
operation (e.g. an INPUT from the
user) or an output operation (e.g. PRINT
some messages).
Process shows a process to be carried out
(e.g. calculation).
Decision shows a decision (or choice) to
be made. The program should continue
along one of two routes (e.g. if...else).
A flow chart is a diagram using symbols to show the step-by-step sequence
of procedures in a program. A flow chart describes the logic and program
flow of a computer program graphically.
Example:
A student requests his marks from
the program.
The program will then check whether
his marks is more/equal to 50 or
not.
If the marks are over or equal to 50,
the program will print a
congratulatory message together
with the marks.
If the marks are lower than 50 then
the program will print a motivational
message together with the result.

5.0 PROGRAMMING
33
LESSON 12
CONTROL STRUCTURES
Control structure is a structure of statements in programming that allows
the programmer to control the flow of a program.
Control structure can be divided
into sequence, selection and
repetition control structures.
SEQUENCE CONTROL
Sequence control refers to the linear execution of codes within a program. In
sequence control, the statements are executed one by one in consecutive
order.
In sequence control, the statements are
executed one by one in consecutive order.

5.0 PROGRAMMING
34
Lets see an example of pseudo code that has sequence control
structure.
This program will request the user s
date of birth and then request today s
date, calculate the age and finally will
print the user s age.
For example, today s date is 1-JAN-
2006, then the results will be shown as
follows:
Let s see another example of pseudo code that has sequence control
structure.
The following is the result of the
example.
Lets see the flow chart for a general sequence control
structure.
As we can see, the flow chart for sequence control is very
simple.
It will execute statement 1 followed by statement 2 and any
following statements.

5.0 PROGRAMMING
35
EXAMPLE
The flow chart represents a program
that will request the user s date of
birth and then request today s date,
calculate the age and finally will display
the user s age.
SELECTION CONTROL
There are times when you want your program to make a decision based on
the situation given.
For example, a program that stores student s
marks may respond differently to different
marks.
Or maybe a simple mathematical program will
display its result as odd or even, based on the
result.
Selection control enables the programmer to
assign different events for different situations.
An example of selection control is If...Then...Else statement. The basic
pseudo code for If...Then...Else statement is as follows.
Let's see a pseudo code
example for the
If...Then...Else" statement
for a program that will print
You are too heavy to ride
the toy car if the student s
weight is more than or
equal to 50.

5.0 PROGRAMMING
36
Otherwise it will print You can ride the toy car
Let's see the flow chart for a similar selection control example.
Let's see a program that will
respond differently for different
service hours in a school library.
A student requests her service hours
in a library from the program, the
program will then check whether her
service hours are more than/equal
to 30 or not.
If the service hours are over or
equal to 30, the program will print a
message, Thank you for your
service .
If the service hours are lower than
30 then the program will print a
message, Please continue to serve
in the library .
Let's write an example of a program that implements sequence
control structure.
This program will declare a constant
pi equal to 3.142. Then the program
declares two variables to be used in
the program (r and volume).
The program will then assign some
value to the r variable.
The program will then calculate the
volume using the formula volume =
(4/3) r
The program will then display the
volume calculated with a message
box.

5.0 PROGRAMMING
37
Now write an example program that implements selection control
structure.
Write a program that will retrieve the
current date from the system.
If today s date is more than 15 then the
program will display a message box with
the message We are towards the end of
the month .
Else the program will print We are at
the beginning of the month .
DIFFERENTIATE BETWEEN SELECTION CONTROL
AND SEQUENCE CONTROL

5.0 PROGRAMMING
38
EXT : REPETITION CONTROL STRUCTURES
Let s learn about the last control structure which is repetition control
structure. A repetition control structure allows the programmer to specify an
action to be repeated while some condition remains true.
This is a pseudo code of "While" structure.
This program segment will continue its looping until the condition of variable
named product is greater than 3000.
This is a flow chart of a repetition control structure.

5.0 PROGRAMMING
39
LESSON 13
OVERVIEW OF PROGRAM DEVELOPMENT PHASES
In program development, there are five main phases. These phases are a
series of steps that programmers undertake to build computer programs.
The program development phases guide computer programmers through the
development of a program.
The five main phases of program development are as follows:

5.0 PROGRAMMING
40
PROBLEM ANALYSIS PHASE
During the problem analysis phase, the programmer will interview the client
to find out what the client s needs are.
For example, the client might be a school that wishes to set up a school
registration program. So the school administrator might tell the programmer
that they need to record students data such as name, date of birth, gender,
class, parents names, address and contact numbers.
PROGRAM DESIGN PHASE
Based on that, the programmer will design a flow chart that represents the
needs of the client, which in this case is the school registration program.
CODING PHASE
Once the flow chart is confirmed, the programmer will perform coding.
TESTING AND DEBUGGING PHASE
The school registration program will be tested by the users at the client s
site. In this case, it will be the school office administrators. If there are any
errors, the programmer will do a debugging of the program.
DOCUMENTATION PHASE
After this, the programmer will complete the documentation for the
program; this includes the user manual, a clear layout of the input and
output records and a program listing.
EXT : SIX STEPS OF SOFTWARE DEVELOPMENT
Step 1
Know your target user.
The software we develop is
for our user. Learn their
preferences.
Step 2
Search for the exciting
possibilities in your software.
In this way, it is possible to
identify their likely concerns
and anxieties and thus take
them into account during the
design stage.

5.0 PROGRAMMING
41
Step 3
Correlate these possibilities with the target user. Find how to combine these
possibilities with user personalities.
Step 4
Immerse yourself in the process. You have to be involved deeply in the
subject that you develop.
Step 5
Engage a talented and visionary designer or developer in the team. They are
responsible for all aspects of the software.
Step 6
Make quality and fantastic features as the priorities among software
development team members.The software should deliver the complete,
accurate, reliable and available information to the right person at the right
time in a suitable format.

5.0 PROGRAMMING
42
LESSON 14
PROBLEM ANALYSIS
PROGRAM DESIGN
The first step in the program development phase is to analyse the problems
faced by target users. In this phase, a programmer reviews and defines the
problems. Identifies the data input, process and output for the program.
CASE STUDY
The school needs a school registration program to computerise the
registration of new students.
Any new student who enrolls in the school should have all his or her data
keyed into the school registration program. They will notified of his or her
class for the coming academic year or term.
This case study will be used throughout the program development phases.
In this case study, the programmer reviews and defines the problems faced
by the school administrators.
The school enrolment has increased so much that it has become very
difficult for them to perform student registration without the help of a
computer program or system.
The programmer must indicate the purpose of the program before
continuing to the next task.
In this case, the purpose of the school registration program is to
computerise the registration of new students.
the problem
Increase of students make the
registration more and more
difficult.
Registration must be made by
using the computer.
the solution
the purpose
Purpose of the school
registration program is to
computerise the registration of
new students.

5.0 PROGRAMMING
43
In this situation, the programmer identifies the data input, process and
output for the program.
First step: The programmer identifies the data input, for example student s
name, student s NRIC, gender, telephone number, date of birth, parents
name and address.
Second step: The programmer identifies the process for the program. Any
new student who enrolls in the school should have all his or her data keyed
into the school's registration program.
PROBLEMS AND SOLUTIONS
In program development, the target user and programmers will face some
problems. Here are some common problems faced by them, and solutions to
overcome them.

5.0 PROGRAMMING
44
LESSON 15
PROGRAM DESIGN
Many inventions today are driven by
computer programs. To develop good
programs, program design is a very
important phase.
PROGRAM DESIGN PHASE
In program design,
there are three
popular tools used,
namely the top-down
design model, pseudo
code and flow chart.
In this case study,
the programmer generates a top-down design model.
This top-down model consists of three modules, namely input module,
process module and output
module.
Then the programmer writes the
pseudo code for the program
based on the top-down design
model.
Case Study
The school needs a school registration
program to computerise the registration
of new students.
Any new student who enrolls in the
school should have all his or her data
keyed into the school registration
program. They will notified of his or
her class for the coming academic
year or term.
This case study will be used throughout
the program development phases.

5.0 PROGRAMMING
45
Next, the programmer draws the flow chart that shows the data flow of the
program.
Besides flow chart, a programmer also produces input and output user
interfaces base on the existing form.
EXT : UNIFIED MODELING LANGUAGE
Unified Modeling Language (UML) has
been adopted as a standard notation for
object modeling and development.
These notations are used in diagrams
that present various views of the
program being developed.
These are some symbols used in Unified Modeling Language Diagrams.

5.0 PROGRAMMING
46
LESSON 16
CODING
The process of writing instructions or code for computers is known as
coding. Hence without coding, there would be no software to help us
perform useful tasks on computers.
CODING
In this phase, a programmer uses a program development tool which
generates or provides some or all codes.
Coding is the process of writing the solution using the computer
programming language. After finishing the coding process, the programmer
will type the programming language code into the computer.

5.0 PROGRAMMING
47
PROGRAMMING LANGUAGE
There are many different programming languages in the market. Examples
of the popular programming languages used in Malaysian secondary schools
are Visual Basic and C language.
Each of these programming languages has its own particular syntax.
CASE STUDY

5.0 PROGRAMMING
48
EXT : EXTREME PROGRAMMING
Extreme programming is a strategy that proposes that a programmer should
immediately begin coding and testing solution as soon as requirements are
defined. The code is continually tested and refined until it works.
Extreme programming also suggests that
programmers work in pairs.
They communicate with each other to generate ideas
for proper solutions.
IT experts claim that extreme programming reduces the time required for
the program development phases.
Extreme programming most often is used in object-oriented design.

5.0 PROGRAMMING
49
LESSON 17
TESTING AND DEBUGGING
For computers to perform their tasks
smoothly, the software or program
must be error-free.
Imagine doing an important assignment
on the computer. Suddenly, there is a
program error and you are unable to
complete your work and meet the
deadline.
That is why before any software is released to the market or given to the
users, it must undergo testing and debugging. Program testing is done right
after coding. The purpose of program testing is to ensure the program runs
correctly without any syntax or logic errors.
If errors are uncovered during testing, the programmer will proceed to
debugging. Debugging involves tracing the source of errors in the program
and making the necessary corrections.
After correcting the errors, it is normal for programmers to test run the
program again just to make sure that the errors have been properly fixed.
TESTING AND DEBUGGING
Once the programmer has finished the coding, the next step is to test it.
The purpose of program testing is to ensure the program runs correctly and
is error-free.
There are three types of errors uncovered during this phase: syntax errors,
logic errors and run-time errors.

5.0 PROGRAMMING
50
SYNTAX ERROR
When the code violates the syntax of the programming language, a syntax
error occurs.
A syntax error is caused by a wrong spelling in command and declaration.
Other syntax errors include case sensitive, punctuation and wrong word
command.
They either show up as you type the program code, or if you have turned off
the automatic syntax error check, the syntax errors show up when you try to
run or compile the program.
When syntax error is located, a message is displayed on the screen.
The programmer must review and correct all syntax errors.

5.0 PROGRAMMING
51
LOGIC ERROR
If the expected output and actual output do not match for any set of data,
the program has a logic error.
A logic error is an error in the design that causes inaccurate outputs.
We can use desk check technique to test logic errors. There are 3 steps to
perform desk checking.
First, create a set of test data that includes input and output data.
Second, use the test data to test the coding and record the result.
Lastly, compare the manual results with the computer generated results.

5.0 PROGRAMMING
52
RUN-TIME ERROR
Run-time error is an error that occurs while the program is running or
executing.
A run-time error may cause the program to stop running.
DEBUGGING
The process of locating and correcting of syntax and logic errors in a
program is known as debugging the program.
The program errors themselves are called bugs. Thus removing the errors
are called debugging.

5.0 PROGRAMMING
53
EXT : BETA
Some software companies distribute a beta version of their software to
users. A beta version is a program that has most or all of its features and
functionality implemented.
Users test the beta program and send in
bug reports to the software company.
This enables the software manufacturer
to fix any errors before the software is
released to the public for sale.

5.0 PROGRAMMING
54
LESSON 18
DOCUMENTATION
In program development,
documentation refers to the written
material generated throughout all the
phases of program development.
Thus documentation includes the
detailed problem definition, the
program plan (flow chart or pseudo
code), comments within the source
program and testing procedures.
It also includes a detailed description of the program, clear layouts of input
and output records and a program listing.
All documentation must be ready by the end of program development.
The programmer should ensure that all documentation is complete and
accurate.
Documentation is very valuable if the program requires changes in the
future as documentation enables new programmers to learn about existing
programs much easily and quickly.
DOCUMENTATION
Documentation refers to the written description and pseudo code of
computer programs.

5.0 PROGRAMMING
55
Although documentation is stated as the last phase in program
development, it is actually performed throughout all the five main phases of
program development.
Documentation consists of materials generated during each phase.
Thus the documentation package is made up of the detailed problem
definition, the program plan (flow chart or pseudo code), comments within
the source program and testing procedures.
Other items in the documentation package also include a detailed description
of the program, clear layouts of input and output records, and a program
listing.
The programmer should ensure that
all documentation is complete and
accurate.
Documentation becomes especially
valuable when the program requires
changes in the future.
Proper documentation greatly
reduces the amount of time a new
programmer spends in learning
about the existing programs.
INTERNAL DOCUMENTATION
Internal documentation consists of comments within the program. These two
types of comments are global comments and internal comments.

5.0 PROGRAMMING
56
Global comments, usually stated at the top of the program, explain the
program s purpose and identify the program s name, its author and the date
the program was written.
Internal comments, which appear throughout the body of the program,
explain the purpose of the code statements within the program.
Internal comments are mostly addressed to other programmers who may
have to make corrections or other modifications in programming language.
EXT : MARKETING DOCUMENTATION
It is important to provide some informative materials that enable people to
learn more about the software product.
This form of documentation, called marketing documentation, has three
purposes.
1. To interest potential users with the product
and encourage them to get more involved.
2. To inform potential users about the product
so that they know what to expect in return.
3. To compare the product with other
alternatives.
Global
comment
Internel
comment

5.0 PROGRAMMING
57
LESSON 19
COMPUTER USERS
DEVELOP A PROGRAM
A project is a set of activities with a fixed start date and end date. Program
development is also a type of project.
A successful program development project will result in one or more
programs that are error-free, affordable, relevant to the needs of the users
and delivered on time.
All the software that you find so helpful, educational and enjoyable today is
the outcome of successful program development projects
For a program development project to succeed, the people involved must
possess the appropriate set of communication, management and technical
skills.
APPLY PROGRAM DEVELOPMENT PHASES TO SOLVE
PROBLEMS
Let s see how a programmer applies program
development phases to solve
the library problems.
Problem Analysis Phase
identifies the data input, processing and output
for the program

5.0 PROGRAMMING
58
Program Design Phase
Pseudo code
Flow Chart

5.0 PROGRAMMING
59
Coding Phase

5.0 PROGRAMMING
60
Testing and Debugging Phase
Documentation Phase

5.0 PROGRAMMING
61
EXT : TIPS AND TECHNIQUES
Let s learn a few tips and techniques on developing a new program using
Microsoft Visual Basic 6.0.
In Microsoft Visual Basic 6.0, undeclared variable will be assigned as
variant type. Variant type is slow, consuming more memory than the
others.
Every procedure and module should have comments explaining their
function. It will be easier for you to maintain the code later.
Use descriptive words for your variables and control. It will be easier
for other people to understand the program if you use this technique.
When using graphic, use *.gif, *.jpg, and *.wmf picture formats
instead of *.bmp. Bitmaps format consume more memory and may
slow your program down.
If you have some code which is repeatedly used, code it as
independent module or function so that you can easily reuse them
later.

5.0 PROGRAMMING
62
LESSON 20
OVERVIEW OF THE LATEST TYPE OF PROGRAMMING
LANGUAGES
THE LATEST TYPE OF PROGRAMMING LANGUAGES
.
FIFTH GENERATION LANGUAGES
Fifth generation programming language (5GL) is
an advance programming language which
concentrates on solving problems using constraints
given to the program.
In fifth generation language, the programmer just
need to define the problem to be solve and the
program will automatically code the program
based on the problem definition.
Fifth generation languages are designed to make the computer solve the
problem for you.
Fifth generation languages are mostly used in artificial intelligence research.
Examples of fifth generation languages include Prolog and Mercury.
NATURAL LANGUAGE
Natural Language programming aims to use natural language such as
English to write a program.
Instead of using a specific programming language syntax, natural language

5.0 PROGRAMMING
63
programming will use normal English as the input to program software.
Such a technique would mean less technical programming knowledge
is required to write a program.
The programmer needs to define the program using normal language.
OPENGL (GRAPHIC LIBRARY)
OpenGL (Graphics Library) is a standard specification to describe the
standard Application Programming Interface (API) for 3D/2D computer
graphic applications.
OpenGL specification describes a set of functions and the exact behaviours
that the 3D/2D application must perform.
OpenGL was developed by Silicon Graphics.
OpenGL is widely used in virtual reality, scientific visualisation, flight
simulation and video game development.

5.0 PROGRAMMING
64
EXT : THE LATEST PROGRAMMING LANGUAGES:
CAPABILITIES & DIFFERENCES
What can the latest programming languages do? How are they different from
the previous or past programming languages?

La5 ict-topic-5-programming

More Related Content

What's hot

Similar to La5 ict-topic-5-programming

More from Azmiah Mahmud

La5 ict-topic-5-programming