fundamentals of data networks and communication

Fundamentals of Data Networks
CPCS371
CPCS371
‫الرحيم‬ ‫الرحمن‬ ‫اهلل‬ ‫بسم‬
‫الرحيم‬ ‫الرحمن‬ ‫اهلل‬ ‫بسم‬
Faculty of Computing and Information Technology, KAU
Computer Science Department
Chapter 1:
Chapter 1: Introduction
Introduction

Chapter 1:
Chapter 1: Introduction
Introduction
1.1 Data Communications
1.2 Networks
1.3 The Internet
1.4 Protocols and Standards

Textbook : Data Communications and Networking, 4th
Behrouz A. Forouzan.

Grading system
Participation: 5
First test:10
Second test: 20
Final test: 30
Lab : 20
Quizzes : 15

Introduction
Introduction
 Data communications and networking
 Change the way we do business and the way we live
 Business decisions have to be made more quickly
 Decision depends on immediate access to accurate
information
 Business today rely on computer networks and
internetworks
 Before get hooked up, we need to know:
 How networks operate
 What types of technologies are available
 Which design best fills which set of needs

Introduction
Introduction
 Development of the PC changes a lot in business, industry,
science and education.
 Similar revolution is occurring in data communication and
networking
Technologies advances are making it possible for
communications links to carry more and faster signals
Services are evolving to allow the use of this expanded
capacity
For example telephone services extended to have:
• Conference calling
• Call waiting
• Voice mail
• Caller ID

Communication:
 Means sharing information
• Local (face to face) or remote (over distance)
 Telecommunication
• Telephone, telegraph and television
• Means communication at a distance
• Tele is Greek for far

Data Communications
Data Communications
Data:
 Refers to information
• Presented in any form
• Agreed upon by the parties ( creating & using)
Data communication : is the exchange of data
between two devices via some form of
transmission medium (wire cable).

Data Communications
Data Communications
 Communication system made up of a combination of
hardware and software
 Effectiveness of data communication system depends
on:
1. Delivery : The system must deliver data to correct
destination. Data received by the indented user only
2. Accuracy: The system must deliver data accurately (no
change).
• Data changed & uncorrected is unusable

Data Communications
Data Communications
3. Timeliness: The system must deliver data in timely
manner
• Data arrived late are useless
• In the same order (video and audio) & without delay (Real time
transmission)
4. Jitter: Variation in the packet arrival time (uneven
quality in the video is the result)

Data Communications
Data Communications

Components
Components
 A data communication system is made up
of five components

Components
Components
1. Message: the information (data) to be communicated
– Consist of text, numbers, pictures, audio, or video
2. Sender: the device that sends the data message
– Computer, workstation, telephone handset, video
camera, …
3. Receiver: the device that receives the message
– Computer, workstation, telephone handset, television,
….

Components
Components
4. Medium: The physical path by which a message
travels from sender to receiver
– twisted pair, coaxial cable, fiber-optic, radio waves

Components
Components
5. Protocol: a set of rules that govern data
communications
– An agreement between the communicating devices
– Devices may be connected but not communicating (no
protocol)
– Arabic speaker with Japanese speaker

Data Representation
Data Representation
Text
Text
Audio
Audio
Video
Video
Numbers
Numbers
Images
Images

Data Representation
Data Representation
Text:
Sequence of bits (0s or 1s)
Different sets of patterns to represent text
symbols (each set is called: code)
ASCII: 7 bits (128 symbols)
common coding system today is:
Unicode uses: 32 bits to represent a symbol or
character in any language
Unicode
Unicode
(4,294,967,296)

Data Representation
Data Representation
Numbers:
Represented by bit patterns
The number is directly converted to a binary
number

Data Representation
Data Representation
Images:
Represented by bit patterns
A matrix of
Resolution: size of the pixels
High resolution: more memory is needed
Each pixel is assigned a bit pattern
1-bit pattern (black and white dots image)
2-bit pattern (4 levels of gray)
RGB (color images)
pixels

Data Representation
Data Representation
Audio:
Continuous not discrete
Change to digital signal
Video:
Recording or broadcasting of a picture or movie
Change to digital signal

Data Flow
Data Flow
Communication between two devices can be:
 Simplex
 Half-Duplex
 Full-Duplex

Data Flow
Data Flow
Simplex (one way street)
 The communication is unidirectional
 Only one device on a link can transmit; the other
can only receive
 Use the entire capacity of the channel to send data
 Example: Keyboards, Monitors
Data

Data Flow
Data Flow
Half-Duplex (one-lane with two-directional traffic)
 Each station can both transmit and receive, but not
at the same time
 When one device is sending, the other can only
receive, and vice versa
 The entire capacity of a channel is taken over by
the transmitting device
 Example: Walkie-talkies
Data
Data

Data Flow
Data Flow
Full-Duplex (Duplex) (two-way street)
 Both stations can transmit and receive at same time
 Signals going in either direction sharing the capacity
of the link
 Sharing can occur in two ways:
 Link has two physically separate transmission paths
• One for sending and the other for receiving
 The capacity of the channel is divided between signals
travelling in both directions
 Example: Telephone network
Data
Data

Exercise
Exercise
What mode of data flow the following exhibits shows?
Answer: Full-Duplex
Data
Data

Networks
Networks
 Network : A set of devices (nodes)
connected by communication links
Node : computer, printer, …
- Distributed Processing :
- Most networks used it
- Task is divided among multiple computers instead of
one single large computer

Networks
Networks
Network Criteria
– Network must meet a certain number of criteria
– The most important of the network criterions are:
– Performance
– Reliability
– Security

Networks
Networks
 Performance
 Transit time: A mount of time required for a message
to travel from one device to another
 Response time: Elapsed time between an inquiry and
a response

Networks
Networks
 Performance
 Performance depends on :
1- Number of users: large number slow response
time.
2- Type of transmission medium: fiber-optic cabling
faster than others cables.
3- Capabilities of the connected hardware: affect
both the speed and capacity of transmission.
4- Efficiency of the software: process data at the
sender and receiver and intermediate affects
network performance.

Networks
Networks
 Performance
 Performance is evaluated by two contradictory
networking metrics:
 Throughput (high): a measure of how fast we can
actually send data through a network
 Delay (low)

Networks
Networks
 Reliability
 Reliability is measured by:
1. Frequency of failure
2. Recovery time of a network after a failure
3. Network’s robustness in a catastrophe: protect by
good back up network system

Networks
Networks
 Security
 Protecting data from unauthorized access
 Protecting data from damage and
development
 Implementing policies and procedures for
recovery from breaches and data losses
(Recovery plan)

Networks
Networks
Physical Structures:
Type of connection
Network: Two or more devices connected through
links
Link: Communication pathway that transfers data
from one device two another
Two devices must be connected in some way to the
same link at the same time. Two possible types:
• Point-to-Point
• Multipoint

Networks
Networks
Point-to-Point
 Dedicated link between two devices
Entire capacity of the link is reserved for
transmission between those two devices
Use an actual length of wire or cable

Networks
Networks
Point-to-Point

Other options, such as microwave or satellite
is possible
Example: Television remote control

Networks
Networks
Multipoint (multidrop)
 More than two devices share a single link
Capacity is shared
Channel is shared either spatially or temporally
 Spatially shared: if devices use link at same time
 Timeshare: if users must take turns

Networks
Networks
Physical Topology
 The way a network is laid out physically
Two or more links form a topology
The topology of a network is the geometric
representation of the relationship of all the
links and linking devices (nodes) to one
another.
Four topologies : Mesh, Star, Bus, and Ring

Physical Topology
Physical Topology

Physical Topology
Physical Topology
Mesh
Every link is dedicated point-to-point link
The term dedicated means that the link carries
traffic only between the two devices it connects

Physical Topology
Physical Topology
Mesh
To link n
n devices fully connected mesh has:
n ( n - 1) / 2
n ( n - 1) / 2 physical channels (Full-
Duplex)
Every Device on the network must have
n - 1
n - 1 ports

Physical Topology
Physical Topology
Mesh
Example:
8 devices in mesh has links: n(n-1) / 2
number of links = 8 (8-1)/2 = 28
number of ports per device = n – 1 = 8 –1 = 7

Physical Topology
Physical Topology
Mesh
Advantages
Each connection carry its own data load (no traffic
problems)
A mesh topology is robust
Privacy or security
Fault identification and fault isolation

Physical Topology
Physical Topology
Mesh:
Disadvantages
Big amount of cabling
Big number of I/O ports
Installation and reconnection are difficult
Sheer bulk of the wiring can be greater than the
available space
Hardware connect to each I/O could be expensive
Mesh topology is implemented in a limited
fashion; e.g., as backbone of hybrid network

Physical Topology
Physical Topology
Star:
Dedicated point-to-point to a central controller
(Hub)
No direct traffic between devices
The control acts as an exchange

Physical Topology
Physical Topology
Star
Advantages
Less expensive than mesh
(1 Link + 1 port per device)
Easy to install and reconfigure
Less cabling
Additions, moves, and deletions required one
connection
Robustness : one fail does not affect others
Easy fault identification and fault isolation

Physical Topology
Physical Topology
Star
Disadvantages
Dependency of the whole topology on one single
point (hub)
More cabling than other topologies ( ring or bus)
Used in LAN

Physical Topology
Physical Topology
Bus
It is multipoint
One long cable acts as a backbone
Used in the design of early LANS, and Ethernet
LANs

Physical Topology
Physical Topology
Bus
Nodes connect to cable by drop lines and taps
Signal travels along the backbone and some of
its energy is transformed to heat
Limit of number of taps and the distance
between taps

Physical Topology
Physical Topology
Bus
Advantages
Ease of installation
Less cables than mesh, star topologies
Disadvantages
Difficult reconnection and fault isolation ( limit of taps)
Adding new device requires modification of backbone
Fault or break stops all transmission
The damaged area reflects signals back in the direction
of the origin, creating noise in both directions

Physical Topology
Physical Topology
Ring
Each device has dedicated point-to-point connection
with only the two devices on either side of it
A signal is passed along the ring in one direction from
device to device until it reaches its destination
Each devices incorporates a Repeater

Physical Topology
Physical Topology
Ring
Advantages
Easy of install and reconfigure
Connect to immediate neighbors
Move two connections for any moving (Add/Delete)
Easy of fault isolation
Disadvantage
Unidirectional
One broken device can disable the entire network. This
weakness can be solved by using a dual ring or a switch
capable of closing off the break

Physical Topology
Physical Topology
Hybrid Topology
Example: having a main star topology with each
branch connecting several stations in a bus
topology

Categories of Networks
Categories of Networks
Network Category depends on its size
Two primary categories
LAN
LAN: Covers area < 2miles
WAN
WAN: Can be worldwide
MAN
MAN: Between LAN & WAN, span 10s of miles

Local Area Network (LAN)
Privately owned
Links devices in the same office, building, or
campus
Simple LAN: 2 PCs & 1 printer in home or office
Size is limited to a few kilometers
Allow resources to be shared (hardware,
software, or data)

An isolated LAN connecting 12 computers to a hub in a closet

LAN is distinguished by:
Size (# users of OS, or licensing restrictions)
Transmission medium (only one type)
Topology (bus, ring, star)
Data Rates (speed):
Early: 4 to 16 Mbps
Today: 100 to 1000 Mbps

Wide Area Networks (WAN)
Provides long-distance transmission of data over
large geographic areas (country, continent,
world)

Switched WAN
Backbone of the Internet
Dialup line point-to-point WAN
Leased line from a telephone company

Metropolitan Area Networks (MAN)
Metropolitan Area Networks (MAN)
Size between LAN and WAN
Inside a town or a city
Example: the part of the telephone company
network that can provide a high-speed DSL to
the customer

Interconnection of Networks:
Interconnection of Networks:
Internetworks
Internetworks
Two or more networks connected together

The Internet
The Internet
Internet has revolutionized many aspects of our daily
lives.
It has affected the way we do business as well as the
way we spend our leisure time.
Internet is a communication system that has brought a
wealth of information to our fingertips and organized it for
our use
An internet is 2 or more networks that can communicate
with each other
The Internet is a collaboration of more than hundreds of
thousands of interconnected networks

The Internet
The Internet
 An internet (small i) is two or more networks
 Notable internet is called the Internet (hundreds of thousands interconnected
networks)
 Private individuals + government agencies + school + research facilities +
Corporations + libraries in more than 100 countries
 This communication system came in 1969
 Mid-1960 (ARPA) Advanced Research Projects Agency in (DOD) was interested to
connect mainframes in research organizations
 1967, ARPA presented its ideas for ARPANET
 Host computer connecting to (IMP) interface message processor.
 Each IMP communicate with other IMP
 1969, four nodes (universities) connected via IMPs to form a network
 Software (NCP) Network Control Protocol provided communication between the
hosts.
 1972, Vint Cerf and Bob Kahn invented (TCP) Transmission Control Protocol
 Later TCP was split to (TCP) Transmission Control Protocol and (IP) Internetworking
Protocol

The Internet
The Internet
Internet Today
Made of many LANs and WANs
Every day new networks area added and
removed
Internet services Providers (ISPs) offer services
to the end users
International service providers
National service providers
Regional service providers
Local service providers
Data
rate

The Internet
The Internet
Hierarchical organization of the Internet

Protocols and Standards
Protocol synonymous with rule
Standards: agreed-upon rules
Protocols
A protocol is a set of rules that govern data
communications
Defines What, How, and When it is communicated

Elements of a protocol:
Syntax: structure or format of data
Example: 8-bits address of sender, 8-bits address of
receiver
Semantics: meaning of each section of bits
Example: Does the address is a route to be taken or the
final destination of the message
Timing: when data should be sent and how fast they
can be sent
Example: sender produces data at 100 Mbps but the
receiver can process data at only 1 Mbps  overload and
data loose

Standards
Standards
Essential in creating and maintaining an open
and competitive market for equipment
manufactures
Guaranteeing national and international
interoperability of data and telecommunication
technology and processes
Providing guidelines to manufacturers, vendors,
government agencies, and other service
providers to ensure the kind of interconnectivity
necessary in today’s marketplace and in
international communications

Standards
Standards
Two categories
De facto: not approved by an organized body
but adopted as standards through widespread
use
De jure: Legislated by an officially recognized
body

Standards
Standards
Standards are developed through the
cooperation of:
Standards Creation Committees
ISO, ITU-T, CCITT, ANSI, IEEE, EIA
Forums
Created by special-interest groups
Present their conclusions to the standards bodies
Regulatory Agencies
Ministry of Telecommunication and Information Technology
(KSA)
Purpose: Protecting the public by regulating radio, television,
and communication

Standards
Standards
Internet standards
Tested thoroughly tested specification that is useful
to be adhered to by those who work with the
Internet
Formalized regulation that must be followed
Specification become Internet standard
Begins as Internet draft for 6 months
Upon recommendation from the Internet authorities
draft published as Request for Comment (RFC)
RFC is edited, assigned a number, and made available to
all interested parties

fundamentals of data networks and communication

More Related Content

Similar to fundamentals of data networks and communication

Recently uploaded

fundamentals of data networks and communication