Uploaded bytechbed
13,320 views

Computer hardware basic -shashank

The document provides a comprehensive guide on computer assembly, detailing steps for installing various components such as the power supply, motherboard, internal and external drives, and adapter cards. It emphasizes the importance of safety precautions like using ESD measures and offers specific instructions on handling sensitive components like CPUs and RAM. Additionally, the document includes guidance on connecting internal and external cables and performing the initial boot and BIOS configuration after assembly.

Embed presentation

Day-1 Computer Assembly IT Essentials: PC Hardware and Software v4.0
Objectives 1.1 Open the case 1.2 Install the power supply 1.3 Attach the components to the motherboard and install the motherboard 1.4 Install internal drives 1.5 Install drives in external bays 1.6 Install adapter cards 1.7 Connect all internal cables 1.8 Re-attach the side panels and connect external cables to the computer 1.9 Boot the computer for the first time
Chapter 3 Labs 3.2 Lab: Install the Power Supply 3.3.3 Lab: Install the Motherboard 3.5.2 Lab: Install the Drives 3.6.3 Lab: Install Adapter Cards 3.7.2 Lab: Install Internal Cables 3.8.2 Lab: Complete the Computer Assembly 3.9.2 Lab: Boot the Computer
Optional Virtual Desktop Activities 3.2 Virtual Desktop Power Supply 3.3.3 Virtual Desktop Motherboard 3.4 Virtual Desktop Internal Drives 3.5.2 Virtual Desktop External Bay Drives 3.6.3 Virtual Desktop Adapter Card 3.7.2 Virtual Desktop Internal Cables 3.8.2 Virtual Desktop External Cables
3.1 Introduction Computer assembly is a large part of a technician's job. Work in a logical, methodical manner when working with computer components Improve computer assembly skills dramatically with practice
Safety First
Safety First
Safety First
ESD Precautions wrist strap grounding mat antistatic bags humidity (30-50%) touch chassis to discharge static electricity
Opening the Case Prepare the workspace before opening the computer case: Adequate lighting Good ventilation Comfortable room temperature Workbench accessible from all sides Avoid cluttering workbench An antistatic mat on the table Small containers to hold screws and other small parts There are different methods for opening cases. To learn how, consult the user manual or manufacturer's website.
3.2 Installing the Power Supply Power supply installation steps include the following: Insert the power supply into the case Align the holes in the power supply with the holes in the case Secure the power supply to the case using the proper screws
3.3 Attaching Components to the Motherboard As part of an upgrade or repair, a technician may need to attach components to the motherboard, and then install the motherboard.
Installing the CPU on the Motherboard The CPU and motherboard are sensitive to electrostatic discharge so use a grounded antistatic mat and wear an antistatic wrist strap. CAUTION : When handling a CPU, do not touch the CPU contacts. The CPU is secured to the socket on the motherboard with a locking assembly .
Installing the CPU
Examining the Socket Interface PGA
Applying the Thermal Compound Thermal compound helps to keep the CPU cool. To install a used CPU, clean it and the base of the heat sink with isopropyl alcohol to remove the old thermal compound. Follow manufacturer’s recommendations about applying the thermal compound.
Installing the Heat Sink/Fan Assembly The Heat Sink/Fan Assembly is a two-part cooling device. The heat sink draws heat away from the CPU. The fan moves the heat away from the heat sink. The heat sink/fan assembly usually has a 3-pin power connector.
Installing CPU and Heat Sink/Fan Assembly Align the CPU so that the Connection 1 indicator is lined up with Pin 1 on the CPU socket. Place the CPU gently into the socket. Close the CPU load plate and secure it by closing the load lever and moving it under the load lever retention tab. Apply a small amount of thermal compound to the CPU and spread it evenly. Follow the application instructions provided by the manufacturer. Line up the heat sink/fan assembly retainers to the holes on the motherboard. Place the heat sink/fan assembly onto the CPU socket, being careful not to pinch the CPU fan wires. Tighten the heat sink/fan assembly retainers to secure the assembly in place. Connect the heat sink/fan assembly power cable to the header on the motherboard.
Installing RAM RAM provides temporary data storage for the CPU while the computer is operating. RAM should be installed in the motherboard before the motherboard is placed in the computer case. RAM installation steps: Align the notches on the RAM module to the keys in the slot and press down until the side tabs click into place. Make sure that the side tabs have locked the RAM module and visually check for exposed contacts.
Installing the Motherboard The motherboard is now ready to install in the computer case. Plastic and metal standoffs are used to mount the motherboard and to prevent it from touching the metal portions of the case. Install only the standoffs that align with the holes in the motherboard. Installing any additional standoffs may prevent the motherboard from being seated properly in the computer case.
Installing the Motherboard
Installing the Motherboard Install standoffs in the computer case. Align the I/O connectors on the back of the motherboard with the openings in the back of the case. Align the screw holes of the motherboard with the standoffs. Insert all of the motherboard screws. Tighten all of the motherboard screws.
3.4 Installing the Internal Drives Drives that are installed in internal bays are called internal drives. A hard disk drive ( HDD ) is an example of an internal drive. HDD installation steps: Position the HDD so that it aligns with the 3.5-inch drive bay. Insert the HDD into the drive bay so that the screw holes in the drive line up with the screw holes in the case. Secure the HDD to the case using the proper screws.
3.5 Installing the Drives in External Bays Drives, such as optical drives ( CD and DVD ) and floppy drives, are installed in drive bays that are accessed from the front of the case. Optical drives and floppy drives store data on removable media. Drives in external bays allow access to the media without opening the case.
Installing the Optical Drive An optical drive is a storage device that reads and writes information to CDs or DVDs. Optical drive installation steps: Position the optical drive to align with the 5.25 inch drive bay. Insert the optical drive into the drive bay so that the optical drive screw holes align with the screw holes in the case. Secure the optical drive to the case using the proper screws.
Installing Floppy Drive A floppy disk drive ( FDD ) is a storage device that reads and writes information to a floppy disk. FDD installation steps: Position the FDD so that it aligns with the 3.5 inch drive bay. Insert the FDD into the drive bay so that the FDD screw holes align with the screw holes in the case. Secure the FDD to the case using the proper screws.
Attaching the Floppy Drive Pin 1 – Red Stripe 34 pin twist A drive on the end of the ribbon cable after the twist If Pin 1 is backwards, the LED stays on for floppy.
Connecting the Floppy Drives The floppy drive exchanges data with the motherboard devices, including the microprocessor, via a 34-pin flat ribbon (data) cable. Current system BIOS versions can support up to two floppy drives on one controller via a daisy chain cable arrangement. Cable pin-outs 10 through 16 are cross-wired between the middle drive connector and end drive connector, producing a twist that reverses the Drive Select (DS) configuration of the drive plugged into the end connector of the ribbon cable. This feature, called cable select , automatically configures the drive on the middle connector as Drive B and the drive on the end connector as Drive A .
3.6 Installing the Adapter Cards Adapter cards are installed to add functionality to a computer. Adapter cards must be compatible with the expansion slot. Some adapter cards: PCIe x1 NIC PCI Wireless NIC PCIe x16 video adapter card
Installing the Network Interface Card (NIC) A NIC enables a computer to connect to a network. NICs use PCI and PCIe expansion slots on the motherboard. NIC installation steps: Align the NIC to the appropriate slot on the motherboard. Press down gently on the NIC until the card is seated. Secure the NIC PC mounting bracket to the case with the appropriate screw.
Installing the Wireless NIC A wireless NIC enables a computer to connect to a wireless network. Some wireless NICs are installed externally with a USB connector. Wireless NIC installation steps: Align the wireless NIC to the appropriate expansion slot on the motherboard. Press down gently on the wireless NIC until the card is fully seated. Secure the mounting bracket to the case with the appropriate screw.
Installing the Video Adapter Card A video adapter card is the interface between a computer and a display monitor. An upgraded video adapter card can provide better graphic capabilities for games and graphic programs. Video adapter card installation steps: Align the video adapter card to the appropriate expansion slot on the motherboard. Press down gently on the video adapter card until the card is fully seated. Secure the video adapter card PC mounting bracket to the case with the appropriate screw.
Video Card Installation AGP
Video Card Installation PCI
Video Card Installation
3.7 Connecting the Internal Cables Power cables are used to distribute electricity from the power supply to the motherboard and other components. Data cables transmit data between the motherboard and storage devices, such as hard drives. Additional cables connect the buttons and link lights on the front of the computer case to the motherboard.
Connecting the Power Cables Motherboard Power Connections The Advanced Technology Extended ( ATX ) main power connector has either 20 or 24 pins. The power supply may also have a 4-pin or 6-pin Auxiliary ( AUX ) power connector that connects to the motherboard. A 20-pin connector will work in a motherboard with a 24-pin socket.
Connecting the Power Cables SATA power connectors use either a 7-pin or 15-pin connector to connect to hard disk drives, optical drives, or any devices that have a SATA power socket. Molex power connectors are used by hard disk drives and optical drives that do not have SATA power sockets. CAUTION : Do not use a Molex connector and a SATA power connector on the same drive at the same time. 4-pin Berg power connector supplies power to a floppy drive. Berg SATA Molex
Power Connector Installation Steps Plug the SATA power connector into the HDD. Plug the Molex power connector into the optical drive. Plug the 4-pin Berg power connector into the FDD. Connect the 3-pin fan power connector into the appropriate fan header on the motherboard, according to the motherboard manual. Plug the additional cables from the case into the appropriate connectors according to the motherboard manual.
PATA Cables Drives connect to the motherboard using data cables. Types of data cables are PATA, SATA, and floppy disk. The PATA cable (sometimes called a ribbon cable) is wide and flat and can have either 40 or 80 conductors. A PATA cable usually has three 40-pin connectors. If multiple hard drives are installed, the master drive will connect to the end connector. The slave drive will connect to the middle connector. Many motherboards have two PATA cable sockets, which provides support for a maximum of four PATA drives.
Installing Hard Drive/CD-ROM Attaching the hard drive and CD-ROM are basically similar. First, the jumper settings should be properly set. The designation of a hard drive or CD-ROM drive as either master or slave is generally determined by the jumper configuration, not by the order in which the drive is daisy-chained to the other drive. The only exception is if the drive is jumpered (set to) "cable select" and both the system and ribbon cable support cable select.
Attaching Hard Drive/CD-ROM IDE ribbon cables: 40 pin/Ultra-ATA 80 connectors Master / Slave / Cable Select settings user jumpers CMOS auto select
Attaching Hard Drive/CD-ROM Inside your computer, you generally have two (2) IDE hard drive controller connections. They look this this 99% of the time. (The smaller one on the very top is a floppy drive controller connection.)
Pictured here are the two cables, the 80-wire and the older 40-wire ATA IDE cables. As you can see, the one on the left, the newer 80-wire cable has very small wires running from connector to connector; conversely, the 40-wire cable has larger wires. There is a reason for this. The newer standard requires the addition and separation of the wires for better signals to achieve the faster speeds. Attaching Hard Drive/CD-ROM
          The 80-wire (conductor) cables are not called 80-pins! The older 40-wire and the newer 80 wire are both 40-pins! Well, actually, they are 39 pins. One pin was removed that was never used so people installing hard drives wouldn't connect them backwards. See the picture below... Cables
Connector Assignments and Color Coding: For the first time, the 80-conductor cable defines specific roles for each of the connectors on the cable; the older cable did not. Color coding of the connectors is used to make it easier to determine which connector goes with each device: Blue: The blue connector attaches to the host (motherboard or controller). Gray: The gray connector is in the middle of the cable, and goes to any slave (Device 1) drive if present on the channel. Black: The black connector is at the opposite end from the host connector and goes to the master drive (Device 0), or a single drive if only one is used. Cables
SATA Cables The SATA data cable has a 7 or 15-pin connector. One end of the cable is connected to the motherboard. The other end is connected to any drive that has a SATA data connector.
SATA Drives and Connectors Power connector Data cable connector SATA power cable SATA data cable
SATA Motherboard Connectors SATA/150 (1) communicates at a rate of 150 Mbps SATA/300 (3) communicates at a rate of 300 Mbps A 7-pin Serial ATA data cable A 15-pin Serial ATA data cable
SATA (Serial ATA) vs. PATA (IDE)
Floppy Drive Cables The floppy drive data cable has a 34-pin connector and it has a stripe to denote the location of pin 1. One connector at the end of the cable connects to the motherboard. The other two connectors connect to drives. If multiple floppy drives are installed, the A: drive will connect to the end connector. The B: drive will connect to the middle connector after the twist . Motherboards have one floppy drive controller which provides support for a maximum of two floppy drives.
Installing Data Cables Plug the motherboard end of the PATA cable into the motherboard socket. Plug the connector at the far end of the PATA cable into the optical drive. Plug one end of the SATA cable into the motherboard socket. Plug the other end of the SATA cable into the HDD. Plug the motherboard end of the FDD cable into the motherboard socket. Plug the connector at the far end of the FDD cable into the floppy drive.
Attaching the LEDs, Keylock and Speaker
Attaching the LEDs Plug the reset-switch, power-switch, HDD-LED, speaker, and power-LED connectors into the motherboard, all labels facing upwards.
3.8 Re-attaching Panels, Connect External Cables Now that all the internal components have been installed and connected to the motherboard and power supply, the side panels are re-attached to the computer case. The next step is to connect the cables for all computer peripherals and the power cable.
Re-attaching the Side Panels Most computer cases have two panels, one on each side. Once the cover is in place, make sure that it is secured at all screw locations. Refer to the documentation or manufacturer’s website if you are unsure about how to remove or replace your computer case. CAUTION : Handle case parts with care. Some computer case covers have sharp or jagged edges.
Connecting External Cables After the case panels have been re-attached, connect the external cables to the back of the computer. External cable connections include: Monitor USB Keyboard Power Mouse Ethernet CAUTION : When attaching cables, never force a connection. NOTE : Plug in the power cable after you have connected all other cables.
Connecting External Cables Attach the monitor cable to the video port. Secure the cable by tightening the screws on the connector. Plug the keyboard cable into the PS/2 keyboard port. Plug the mouse cable into the PS/2 mouse port. Plug the USB cable into a USB port. Plug the network cable into the network port. Connect the wireless antenna to the antenna connector. Plug the power cable into the power supply.
3.9 Booting the Computer for the First Time The BIOS is a set of instructions stored in a nonvolatile memory chip. When the computer is booted, the basic input/output system ( BIOS ) will perform a power-on self test ( POST ) to check on all of the internal components. A special key or combination of keys on the keyboard is used to enter the BIOS setup program. The BIOS setup program displays information about all of the components in the computer.
Identifying Beep Codes POST checks to see that all of the hardware in the computer is operating correctly. If a device is malfunctioning, an error or a beep code alerts the technician that there is a problem. Typically, a single beep denotes that the computer is functioning properly. If there is a hardware problem, the computer may emit a series of beeps. Each BIOS manufacturer uses different codes to indicate hardware problems. Consult the motherboard documentation to view beep codes for your computer.
BIOS Setup The BIOS contains a setup program used to configure settings for hardware devices. The configuration data is saved to a special memory chip called a complementary metal-oxide semiconductor ( CMOS ). CMOS is maintained by the battery in the computer. If this battery dies, all BIOS setup configuration data will be lost. Replace the battery and reconfigure the BIOS settings.
BIOS Setup Program BIOS settings are configured in the BIOS setup program.
Entering the BIOS Setup Program CMOS determines what types of options are installed CMOS password can be configured to protect settings. If forgotten, use jumper on motherboard to reset or remove battery . System BIOS allows access to configuration information in CMOS setup utility proper key combination Registers are examined each time the system is booted up.
Standard CMOS Setup Screen The standard CMOS setup screen includes the basic operating parameters that need to be set for the system to work correctly . Date / Time Hard Disks Boot Order Video
BIOS Features and Chipset Features Setup Screens
Power Management and Plug and Play Screens
Integrated Peripherals and Fixed Disk Detection Screens
Password Screens and the Load Setup Defaults Screen
BIOS Exit Options
Chapter 3 Summary Computer Assembly Installation of all computer components Connection of all cables Description of BIOS Description of POST
Additional Resources Whatis?com: IT Encyclopedia and Learning Center http://whatis.com TechTarget: The Most Targeted IT Media http://techtarget.com ZDNet: Tech News, Blogs and White Papers for IT Professionals http://www.zdnet.com HowStuffWorks: It's Good to Know http://computer.howstuffworks.com CNET.com http://www.cnet.com PC World http://www.pcworld.com ComputerWorld http://www.computerworld.com WIRED NEWS http://www.wired.com eWEEK.com http://www.eweek.com
Let’s see what you have learned . . . Q : A technician is installing a new power supply in a computer. Which type of power connector should be used to connect to a PATA hard drive? A: Molex Q : A technician is installing a new power supply in a computer. Which type of power connector should be used to connect to a floppy drive? A: Berg Q : A technician is installing a new CPU in a ZIF socket on a motherboard. What is the primary way of securing the CPU in place? A: locking lever Q : What two components should be installed on a motherboard before it is mounted in the case? A: CPU and RAM
Let’s see what you have learned . . . Q : Which solution should be used to clean a CPU and a heat sink? A: isopropyl alcohol Q : A technician is troubleshooting a computer that has a malfunctioning floppy drive. The technician observes that the floppy drive light remains lit constantly. How should the technician attempt to repair the problem? A: Connect the data cable making sure that the colored stripe on the cable is aligned with pin 1 on the drive and the motherboard Q : A sound card, a NIC, and a modem can be installed on which type of slots? A: PCI and PCIe Q : Which port is typically used for external wireless NICs? A: USB
 

More Related Content

PPTX
Install computer system,devices and peripherals
byRaiza Janelle
 
PDF
CSS L05 - Computer System Assembly
byMarvin Bronoso
 
PDF
K to 12_entrep-based_pc_hardware_servicing_learning_module
byJohndion Ruloma
 
PPTX
Lesson 3
byMLG College of Learning, Inc
 
PDF
Computer Hardware-servicing-learning-module
byBogs De Castro
 
PPT
COMPUTER STORAGE
byYanne Evangelista
 
DOCX
TLE10_ICT_CSS_Q1_M3_v3.docx
byXyrevManeclang
 
PPTX
Bootable-USB.pptx
byDevineGraceValo2
 
Install computer system,devices and peripherals
byRaiza Janelle
 
CSS L05 - Computer System Assembly
byMarvin Bronoso
 
K to 12_entrep-based_pc_hardware_servicing_learning_module
byJohndion Ruloma
 
Lesson 3
byMLG College of Learning, Inc
 
Computer Hardware-servicing-learning-module
byBogs De Castro
 
COMPUTER STORAGE
byYanne Evangelista
 
TLE10_ICT_CSS_Q1_M3_v3.docx
byXyrevManeclang
 
Bootable-USB.pptx
byDevineGraceValo2
 

What's hot

PPTX
Ch 2 computer assembly disassembly
bymekashaw tizazu
 
PPTX
Computer assembly
byMLG College of Learning, Inc
 
PDF
Assembling a computer
byJagpal Singh Bais
 
PPTX
The Motherboard
byRachel Espino
 
PPTX
Computer Hardware: Parts & Functions
byRay Monterola
 
PPTX
COMPUTER HARDWARE ASSEMBLING
byNikhil Sasikumar
 
PDF
Css grade 11 week 1
byDanilo Anos
 
PDF
CSS L04 - Integral Parts of the Computer System
byMarvin Bronoso
 
PPTX
Computer specifications
byMelchor Maravillas
 
PPT
Bios
byVishal Gohel
 
PPT
Basic Computer Parts
byDusten Keppner
 
PPTX
Parts of a computer
byAmit Jaglan
 
PDF
Introduction to Computer Hardware Assembling
byRanjith Siji
 
PPTX
Parts of motherboard and its function
bymyebautista01031980
 
PDF
Grade 11_Q1_W5-6_3.b_PerformMensuration_for Student.pdf
bysherelynbalada1
 
PPTX
5 pc maintenance
byRheigh Henley Calderon
 
PPTX
Computer ports
byGoodthingbetter
 
PPT
Cpu
byrozanadiana
 
PPT
Parts of a Computer
byMatt Shea
 
PPTX
Configure Computer System and Network
byEILLEN IVY PORTUGUEZ
 
Ch 2 computer assembly disassembly
bymekashaw tizazu
 
Computer assembly
byMLG College of Learning, Inc
 
Assembling a computer
byJagpal Singh Bais
 
The Motherboard
byRachel Espino
 
Computer Hardware: Parts & Functions
byRay Monterola
 
COMPUTER HARDWARE ASSEMBLING
byNikhil Sasikumar
 
Css grade 11 week 1
byDanilo Anos
 
CSS L04 - Integral Parts of the Computer System
byMarvin Bronoso
 
Computer specifications
byMelchor Maravillas
 
Bios
byVishal Gohel
 
Basic Computer Parts
byDusten Keppner
 
Parts of a computer
byAmit Jaglan
 
Introduction to Computer Hardware Assembling
byRanjith Siji
 
Parts of motherboard and its function
bymyebautista01031980
 
Grade 11_Q1_W5-6_3.b_PerformMensuration_for Student.pdf
bysherelynbalada1
 
5 pc maintenance
byRheigh Henley Calderon
 
Computer ports
byGoodthingbetter
 
Cpu
byrozanadiana
 
Parts of a Computer
byMatt Shea
 
Configure Computer System and Network
byEILLEN IVY PORTUGUEZ
 

Viewers also liked

PPTX
Motherboard arch. & component
byRahul Yadav
 
PPTX
Motherboard + ports & connector
bynorhaslinamj
 
PPTX
Ports and connectors
bychrispaul8676
 
PPT
Lesson2 how motherboards work
byJecka Cortez
 
PPTX
Unit 3- Internal components.
bygeorgehurrell99
 
PPTX
Computer Ports
byVeronica Alejandro
 
PPT
Cables and connectors
byshowslides
 
DOC
Main component of motherboard
byROSNIZA_NAIMAT
 
PDF
34 pc assembling
bynikesh124
 
Motherboard arch. & component
byRahul Yadav
 
Motherboard + ports & connector
bynorhaslinamj
 
Ports and connectors
bychrispaul8676
 
Lesson2 how motherboards work
byJecka Cortez
 
Unit 3- Internal components.
bygeorgehurrell99
 
Computer Ports
byVeronica Alejandro
 
Cables and connectors
byshowslides
 
Main component of motherboard
byROSNIZA_NAIMAT
 
34 pc assembling
bynikesh124
 

Similar to Computer hardware basic -shashank

PPTX
ASSEMBLY-AND-DISASSEMBLY (1).pptx
byVirgilio Paglingayen
 
PPTX
Computer Assembly.pptx
byAndrew_Braza
 
DOCX
Assemble a desktop pc
byRajat Gupta
 
PPT
Assembling the computer
bySantosh Kulkarni
 
PPTX
1.1-4 Assemble Computer Hardware PowerPoint.pptx
byRandyGaray
 
PDF
Css grade 11 week 4
byDanilo Anos
 
PPTX
2.3
byFrya Lora
 
PPT
Assembling
byMagline Pereira
 
PPTX
ASSEMBLY-AND-DISASSEMBLY.pptx
byVirgilio Paglingayen
 
PPTX
ASSEMBLY-AND-DISASSEMBLY.pptx
byVirgilio Paglingayen
 
PPTX
Building a computer in virtual desktop.
byOriginalGSM
 
PDF
SYSTEM ADMINISTRATION AND MAINTENANCE NOTES PERIYAR UNIVERSITY
byGOKUL SREE
 
PPT
Assembling_a_Computer.ppt
byrafi266513
 
PPTX
3rd quarter quiz on module 1-2 & pc assembly.pptx
byalcan9071
 
PPTX
Computer maintenance and engineering Data
byZayeedAmr
 
DOCX
Assembly of computer system
bysyed mehdi raza
 
PPT
Dasar komputer chapter3
byteknik komputer ui
 
PPTX
Building a computer virtual desktop computer components
byOriginalGSM
 
PPTX
Assembling.pptx
byGauravSharmaIAHAP
 
PPTX
buildingapc.pptx
byssusera3b659
 
ASSEMBLY-AND-DISASSEMBLY (1).pptx
byVirgilio Paglingayen
 
Computer Assembly.pptx
byAndrew_Braza
 
Assemble a desktop pc
byRajat Gupta
 
Assembling the computer
bySantosh Kulkarni
 
1.1-4 Assemble Computer Hardware PowerPoint.pptx
byRandyGaray
 
Css grade 11 week 4
byDanilo Anos
 
2.3
byFrya Lora
 
Assembling
byMagline Pereira
 
ASSEMBLY-AND-DISASSEMBLY.pptx
byVirgilio Paglingayen
 
ASSEMBLY-AND-DISASSEMBLY.pptx
byVirgilio Paglingayen
 
Building a computer in virtual desktop.
byOriginalGSM
 
SYSTEM ADMINISTRATION AND MAINTENANCE NOTES PERIYAR UNIVERSITY
byGOKUL SREE
 
Assembling_a_Computer.ppt
byrafi266513
 
3rd quarter quiz on module 1-2 & pc assembly.pptx
byalcan9071
 
Computer maintenance and engineering Data
byZayeedAmr
 
Assembly of computer system
bysyed mehdi raza
 
Dasar komputer chapter3
byteknik komputer ui
 
Building a computer virtual desktop computer components
byOriginalGSM
 
Assembling.pptx
byGauravSharmaIAHAP
 
buildingapc.pptx
byssusera3b659
 

More from techbed

PPT
1432.encoding concepts
bytechbed
 
PDF
Part 7 packaging and deployment
bytechbed
 
PDF
Lab 5b) create a java server faces application
bytechbed
 
PDF
Part 6 debugging and testing java applications
bytechbed
 
PDF
1454.ata features
bytechbed
 
PDF
Flash cs4 tutorials_2009
bytechbed
 
PDF
1455.ata atapi standards - 1-7
bytechbed
 
PDF
Lab 7b) test a web application
bytechbed
 
PDF
First java-server-faces-tutorial-en
bytechbed
 
PDF
Part 4 working with databases
bytechbed
 
PDF
What is struts_en
bytechbed
 
PDF
Part 3 web development
bytechbed
 
PDF
Lab 5a) create a struts application
bytechbed
 
PDF
Lab 6) package and deploy a j2 ee application
bytechbed
 
PDF
Part 5 running java applications
bytechbed
 
PDF
Lab 4) working with databases
bytechbed
 
PDF
Photoshop tut
bytechbed
 
PDF
Lab 7a) debug a web application
bytechbed
 
PDF
1456.base boot
bytechbed
 
PDF
Lab 3) create a web application
bytechbed
 
1432.encoding concepts
bytechbed
 
Part 7 packaging and deployment
bytechbed
 
Lab 5b) create a java server faces application
bytechbed
 
Part 6 debugging and testing java applications
bytechbed
 
1454.ata features
bytechbed
 
Flash cs4 tutorials_2009
bytechbed
 
1455.ata atapi standards - 1-7
bytechbed
 
Lab 7b) test a web application
bytechbed
 
First java-server-faces-tutorial-en
bytechbed
 
Part 4 working with databases
bytechbed
 
What is struts_en
bytechbed
 
Part 3 web development
bytechbed
 
Lab 5a) create a struts application
bytechbed
 
Lab 6) package and deploy a j2 ee application
bytechbed
 
Part 5 running java applications
bytechbed
 
Lab 4) working with databases
bytechbed
 
Photoshop tut
bytechbed
 
Lab 7a) debug a web application
bytechbed
 
1456.base boot
bytechbed
 
Lab 3) create a web application
bytechbed
 

Recently uploaded

PPTX
Overview of how to Create a Model in Odoo 18
byCeline George
 
PPTX
3 G8_Q3_L3_ (Cartoon as Representation in Opinion Editorial Article).pptx
byNorafeSahagun
 
PPTX
GROWTH & DEVELOPMET MILESTONES (TODDLER).pptx
byAneetaSharma15
 
PPTX
ATTENTION -PART 2.pptx Shilpa Hotakar for I semester BSc students
bySHILPA HOTAKAR
 
PPTX
Access partner report in Odoo 18.2 _ Odoo 19
byCeline George
 
PPTX
How to Track a Link Using Odoo 18 SMS Marketing
byCeline George
 
PDF
Environmental Studies Module 1 BBA,BCCA Sem 1 NEP.pdf
byJayanti Pande
 
PPTX
How to Access Revenue Report in Odoo 18 Events
byCeline George
 
PPTX
Multiple Linear Regression - Least Square Method X₁ on X₂ and X₃
bySundar B N
 
PPTX
B. Pharmacy Unit-3 (Fats and Oils Reaction and Analytical Constant)
bySandeshSul
 
PPTX
GROWTH & DEVELOPMENT MILESTONES (INFANTS).pptx
byAneetaSharma15
 
PPTX
Isolation, Identification and Analysis of phytoconstituents.
byD. Y. Patil College of Pharmacy, Kolhapur.
 
PPTX
Industrial production, estimation and utilization of the following phytoconst...
byD. Y. Patil College of Pharmacy, Kolhapur.
 
PDF
M.Sc. Nonchordates Complete Syllabus PPT | All Important Topics Covered
byKNIPSS SULTANPUR
 
PPTX
META-ANALYSIS INTERPRETATION, PUBLICATION BIAS AND GRADE ASSESSMENT.pptx
bySystematic Reviews Network (SRN)
 
PDF
Blood Group Incompatibility: Rh Factor and Erythroblastosis Fetalis
bySudhandraKarthi
 
PDF
Risk management in Moroccan public hospitals_ a literature review
byMan_Ebook
 
PPTX
Coefficient of Multiple Correlation - R₁.₂₃, R₂.₁₃ & R₃.₁₂
bySundar B N
 
PDF
Cultivating Greatness Pune's Best Preschools and Schools.pdf
byWellington College
 
PDF
Madhumathi Endowment Quiz Finals by Sreejesh P S and Shyam Krishnan P - Keral...
bySreejesh P S
 
Overview of how to Create a Model in Odoo 18
byCeline George
 
3 G8_Q3_L3_ (Cartoon as Representation in Opinion Editorial Article).pptx
byNorafeSahagun
 
GROWTH & DEVELOPMET MILESTONES (TODDLER).pptx
byAneetaSharma15
 
ATTENTION -PART 2.pptx Shilpa Hotakar for I semester BSc students
bySHILPA HOTAKAR
 
Access partner report in Odoo 18.2 _ Odoo 19
byCeline George
 
How to Track a Link Using Odoo 18 SMS Marketing
byCeline George
 
Environmental Studies Module 1 BBA,BCCA Sem 1 NEP.pdf
byJayanti Pande
 
How to Access Revenue Report in Odoo 18 Events
byCeline George
 
Multiple Linear Regression - Least Square Method X₁ on X₂ and X₃
bySundar B N
 
B. Pharmacy Unit-3 (Fats and Oils Reaction and Analytical Constant)
bySandeshSul
 
GROWTH & DEVELOPMENT MILESTONES (INFANTS).pptx
byAneetaSharma15
 
Isolation, Identification and Analysis of phytoconstituents.
byD. Y. Patil College of Pharmacy, Kolhapur.
 
Industrial production, estimation and utilization of the following phytoconst...
byD. Y. Patil College of Pharmacy, Kolhapur.
 
M.Sc. Nonchordates Complete Syllabus PPT | All Important Topics Covered
byKNIPSS SULTANPUR
 
META-ANALYSIS INTERPRETATION, PUBLICATION BIAS AND GRADE ASSESSMENT.pptx
bySystematic Reviews Network (SRN)
 
Blood Group Incompatibility: Rh Factor and Erythroblastosis Fetalis
bySudhandraKarthi
 
Risk management in Moroccan public hospitals_ a literature review
byMan_Ebook
 
Coefficient of Multiple Correlation - R₁.₂₃, R₂.₁₃ & R₃.₁₂
bySundar B N
 
Cultivating Greatness Pune's Best Preschools and Schools.pdf
byWellington College
 
Madhumathi Endowment Quiz Finals by Sreejesh P S and Shyam Krishnan P - Keral...
bySreejesh P S
 

Computer hardware basic -shashank

  • 1.
    Day-1 Computer AssemblyIT Essentials: PC Hardware and Software v4.0
  • 2.
    Objectives 1.1 Openthe case 1.2 Install the power supply 1.3 Attach the components to the motherboard and install the motherboard 1.4 Install internal drives 1.5 Install drives in external bays 1.6 Install adapter cards 1.7 Connect all internal cables 1.8 Re-attach the side panels and connect external cables to the computer 1.9 Boot the computer for the first time
  • 3.
    Chapter 3 Labs3.2 Lab: Install the Power Supply 3.3.3 Lab: Install the Motherboard 3.5.2 Lab: Install the Drives 3.6.3 Lab: Install Adapter Cards 3.7.2 Lab: Install Internal Cables 3.8.2 Lab: Complete the Computer Assembly 3.9.2 Lab: Boot the Computer
  • 4.
    Optional Virtual DesktopActivities 3.2 Virtual Desktop Power Supply 3.3.3 Virtual Desktop Motherboard 3.4 Virtual Desktop Internal Drives 3.5.2 Virtual Desktop External Bay Drives 3.6.3 Virtual Desktop Adapter Card 3.7.2 Virtual Desktop Internal Cables 3.8.2 Virtual Desktop External Cables
  • 5.
    3.1 Introduction Computerassembly is a large part of a technician's job. Work in a logical, methodical manner when working with computer components Improve computer assembly skills dramatically with practice
  • 6.
  • 7.
  • 8.
  • 9.
    ESD Precautions wriststrap grounding mat antistatic bags humidity (30-50%) touch chassis to discharge static electricity
  • 10.
    Opening the CasePrepare the workspace before opening the computer case: Adequate lighting Good ventilation Comfortable room temperature Workbench accessible from all sides Avoid cluttering workbench An antistatic mat on the table Small containers to hold screws and other small parts There are different methods for opening cases. To learn how, consult the user manual or manufacturer's website.
  • 11.
    3.2 Installing thePower Supply Power supply installation steps include the following: Insert the power supply into the case Align the holes in the power supply with the holes in the case Secure the power supply to the case using the proper screws
  • 12.
    3.3 Attaching Componentsto the Motherboard As part of an upgrade or repair, a technician may need to attach components to the motherboard, and then install the motherboard.
  • 13.
    Installing the CPUon the Motherboard The CPU and motherboard are sensitive to electrostatic discharge so use a grounded antistatic mat and wear an antistatic wrist strap. CAUTION : When handling a CPU, do not touch the CPU contacts. The CPU is secured to the socket on the motherboard with a locking assembly .
  • 14.
  • 15.
    Examining the SocketInterface PGA
  • 16.
    Applying the ThermalCompound Thermal compound helps to keep the CPU cool. To install a used CPU, clean it and the base of the heat sink with isopropyl alcohol to remove the old thermal compound. Follow manufacturer’s recommendations about applying the thermal compound.
  • 17.
    Installing the HeatSink/Fan Assembly The Heat Sink/Fan Assembly is a two-part cooling device. The heat sink draws heat away from the CPU. The fan moves the heat away from the heat sink. The heat sink/fan assembly usually has a 3-pin power connector.
  • 18.
    Installing CPU andHeat Sink/Fan Assembly Align the CPU so that the Connection 1 indicator is lined up with Pin 1 on the CPU socket. Place the CPU gently into the socket. Close the CPU load plate and secure it by closing the load lever and moving it under the load lever retention tab. Apply a small amount of thermal compound to the CPU and spread it evenly. Follow the application instructions provided by the manufacturer. Line up the heat sink/fan assembly retainers to the holes on the motherboard. Place the heat sink/fan assembly onto the CPU socket, being careful not to pinch the CPU fan wires. Tighten the heat sink/fan assembly retainers to secure the assembly in place. Connect the heat sink/fan assembly power cable to the header on the motherboard.
  • 19.
    Installing RAM RAM provides temporary data storage for the CPU while the computer is operating. RAM should be installed in the motherboard before the motherboard is placed in the computer case. RAM installation steps: Align the notches on the RAM module to the keys in the slot and press down until the side tabs click into place. Make sure that the side tabs have locked the RAM module and visually check for exposed contacts.
  • 20.
    Installing the MotherboardThe motherboard is now ready to install in the computer case. Plastic and metal standoffs are used to mount the motherboard and to prevent it from touching the metal portions of the case. Install only the standoffs that align with the holes in the motherboard. Installing any additional standoffs may prevent the motherboard from being seated properly in the computer case.
  • 21.
  • 22.
    Installing the MotherboardInstall standoffs in the computer case. Align the I/O connectors on the back of the motherboard with the openings in the back of the case. Align the screw holes of the motherboard with the standoffs. Insert all of the motherboard screws. Tighten all of the motherboard screws.
  • 23.
    3.4 Installing theInternal Drives Drives that are installed in internal bays are called internal drives. A hard disk drive ( HDD ) is an example of an internal drive. HDD installation steps: Position the HDD so that it aligns with the 3.5-inch drive bay. Insert the HDD into the drive bay so that the screw holes in the drive line up with the screw holes in the case. Secure the HDD to the case using the proper screws.
  • 24.
    3.5 Installing theDrives in External Bays Drives, such as optical drives ( CD and DVD ) and floppy drives, are installed in drive bays that are accessed from the front of the case. Optical drives and floppy drives store data on removable media. Drives in external bays allow access to the media without opening the case.
  • 25.
    Installing the OpticalDrive An optical drive is a storage device that reads and writes information to CDs or DVDs. Optical drive installation steps: Position the optical drive to align with the 5.25 inch drive bay. Insert the optical drive into the drive bay so that the optical drive screw holes align with the screw holes in the case. Secure the optical drive to the case using the proper screws.
  • 26.
    Installing Floppy DriveA floppy disk drive ( FDD ) is a storage device that reads and writes information to a floppy disk. FDD installation steps: Position the FDD so that it aligns with the 3.5 inch drive bay. Insert the FDD into the drive bay so that the FDD screw holes align with the screw holes in the case. Secure the FDD to the case using the proper screws.
  • 27.
    Attaching the FloppyDrive Pin 1 – Red Stripe 34 pin twist A drive on the end of the ribbon cable after the twist If Pin 1 is backwards, the LED stays on for floppy.
  • 28.
    Connecting the FloppyDrives The floppy drive exchanges data with the motherboard devices, including the microprocessor, via a 34-pin flat ribbon (data) cable. Current system BIOS versions can support up to two floppy drives on one controller via a daisy chain cable arrangement. Cable pin-outs 10 through 16 are cross-wired between the middle drive connector and end drive connector, producing a twist that reverses the Drive Select (DS) configuration of the drive plugged into the end connector of the ribbon cable. This feature, called cable select , automatically configures the drive on the middle connector as Drive B and the drive on the end connector as Drive A .
  • 29.
    3.6 Installing theAdapter Cards Adapter cards are installed to add functionality to a computer. Adapter cards must be compatible with the expansion slot. Some adapter cards: PCIe x1 NIC PCI Wireless NIC PCIe x16 video adapter card
  • 30.
    Installing the NetworkInterface Card (NIC) A NIC enables a computer to connect to a network. NICs use PCI and PCIe expansion slots on the motherboard. NIC installation steps: Align the NIC to the appropriate slot on the motherboard. Press down gently on the NIC until the card is seated. Secure the NIC PC mounting bracket to the case with the appropriate screw.
  • 31.
    Installing the WirelessNIC A wireless NIC enables a computer to connect to a wireless network. Some wireless NICs are installed externally with a USB connector. Wireless NIC installation steps: Align the wireless NIC to the appropriate expansion slot on the motherboard. Press down gently on the wireless NIC until the card is fully seated. Secure the mounting bracket to the case with the appropriate screw.
  • 32.
    Installing the VideoAdapter Card A video adapter card is the interface between a computer and a display monitor. An upgraded video adapter card can provide better graphic capabilities for games and graphic programs. Video adapter card installation steps: Align the video adapter card to the appropriate expansion slot on the motherboard. Press down gently on the video adapter card until the card is fully seated. Secure the video adapter card PC mounting bracket to the case with the appropriate screw.
  • 33.
  • 34.
  • 35.
  • 36.
    3.7 Connecting theInternal Cables Power cables are used to distribute electricity from the power supply to the motherboard and other components. Data cables transmit data between the motherboard and storage devices, such as hard drives. Additional cables connect the buttons and link lights on the front of the computer case to the motherboard.
  • 37.
    Connecting the PowerCables Motherboard Power Connections The Advanced Technology Extended ( ATX ) main power connector has either 20 or 24 pins. The power supply may also have a 4-pin or 6-pin Auxiliary ( AUX ) power connector that connects to the motherboard. A 20-pin connector will work in a motherboard with a 24-pin socket.
  • 38.
    Connecting the PowerCables SATA power connectors use either a 7-pin or 15-pin connector to connect to hard disk drives, optical drives, or any devices that have a SATA power socket. Molex power connectors are used by hard disk drives and optical drives that do not have SATA power sockets. CAUTION : Do not use a Molex connector and a SATA power connector on the same drive at the same time. 4-pin Berg power connector supplies power to a floppy drive. Berg SATA Molex
  • 39.
    Power Connector InstallationSteps Plug the SATA power connector into the HDD. Plug the Molex power connector into the optical drive. Plug the 4-pin Berg power connector into the FDD. Connect the 3-pin fan power connector into the appropriate fan header on the motherboard, according to the motherboard manual. Plug the additional cables from the case into the appropriate connectors according to the motherboard manual.
  • 40.
    PATA Cables Drivesconnect to the motherboard using data cables. Types of data cables are PATA, SATA, and floppy disk. The PATA cable (sometimes called a ribbon cable) is wide and flat and can have either 40 or 80 conductors. A PATA cable usually has three 40-pin connectors. If multiple hard drives are installed, the master drive will connect to the end connector. The slave drive will connect to the middle connector. Many motherboards have two PATA cable sockets, which provides support for a maximum of four PATA drives.
  • 41.
    Installing Hard Drive/CD-ROMAttaching the hard drive and CD-ROM are basically similar. First, the jumper settings should be properly set. The designation of a hard drive or CD-ROM drive as either master or slave is generally determined by the jumper configuration, not by the order in which the drive is daisy-chained to the other drive. The only exception is if the drive is jumpered (set to) "cable select" and both the system and ribbon cable support cable select.
  • 42.
    Attaching Hard Drive/CD-ROMIDE ribbon cables: 40 pin/Ultra-ATA 80 connectors Master / Slave / Cable Select settings user jumpers CMOS auto select
  • 43.
    Attaching Hard Drive/CD-ROMInside your computer, you generally have two (2) IDE hard drive controller connections. They look this this 99% of the time. (The smaller one on the very top is a floppy drive controller connection.)
  • 44.
    Pictured here arethe two cables, the 80-wire and the older 40-wire ATA IDE cables. As you can see, the one on the left, the newer 80-wire cable has very small wires running from connector to connector; conversely, the 40-wire cable has larger wires. There is a reason for this. The newer standard requires the addition and separation of the wires for better signals to achieve the faster speeds. Attaching Hard Drive/CD-ROM
  • 45.
              The 80-wire(conductor) cables are not called 80-pins! The older 40-wire and the newer 80 wire are both 40-pins! Well, actually, they are 39 pins. One pin was removed that was never used so people installing hard drives wouldn't connect them backwards. See the picture below... Cables
  • 46.
    Connector Assignments andColor Coding: For the first time, the 80-conductor cable defines specific roles for each of the connectors on the cable; the older cable did not. Color coding of the connectors is used to make it easier to determine which connector goes with each device: Blue: The blue connector attaches to the host (motherboard or controller). Gray: The gray connector is in the middle of the cable, and goes to any slave (Device 1) drive if present on the channel. Black: The black connector is at the opposite end from the host connector and goes to the master drive (Device 0), or a single drive if only one is used. Cables
  • 47.
    SATA Cables The SATA data cable has a 7 or 15-pin connector. One end of the cable is connected to the motherboard. The other end is connected to any drive that has a SATA data connector.
  • 48.
    SATA Drives andConnectors Power connector Data cable connector SATA power cable SATA data cable
  • 49.
    SATA Motherboard ConnectorsSATA/150 (1) communicates at a rate of 150 Mbps SATA/300 (3) communicates at a rate of 300 Mbps A 7-pin Serial ATA data cable A 15-pin Serial ATA data cable
  • 50.
    SATA (Serial ATA)vs. PATA (IDE)
  • 51.
    Floppy Drive CablesThe floppy drive data cable has a 34-pin connector and it has a stripe to denote the location of pin 1. One connector at the end of the cable connects to the motherboard. The other two connectors connect to drives. If multiple floppy drives are installed, the A: drive will connect to the end connector. The B: drive will connect to the middle connector after the twist . Motherboards have one floppy drive controller which provides support for a maximum of two floppy drives.
  • 52.
    Installing Data CablesPlug the motherboard end of the PATA cable into the motherboard socket. Plug the connector at the far end of the PATA cable into the optical drive. Plug one end of the SATA cable into the motherboard socket. Plug the other end of the SATA cable into the HDD. Plug the motherboard end of the FDD cable into the motherboard socket. Plug the connector at the far end of the FDD cable into the floppy drive.
  • 53.
    Attaching the LEDs,Keylock and Speaker
  • 54.
    Attaching the LEDsPlug the reset-switch, power-switch, HDD-LED, speaker, and power-LED connectors into the motherboard, all labels facing upwards.
  • 55.
    3.8 Re-attaching Panels,Connect External Cables Now that all the internal components have been installed and connected to the motherboard and power supply, the side panels are re-attached to the computer case. The next step is to connect the cables for all computer peripherals and the power cable.
  • 56.
    Re-attaching the SidePanels Most computer cases have two panels, one on each side. Once the cover is in place, make sure that it is secured at all screw locations. Refer to the documentation or manufacturer’s website if you are unsure about how to remove or replace your computer case. CAUTION : Handle case parts with care. Some computer case covers have sharp or jagged edges.
  • 57.
    Connecting External CablesAfter the case panels have been re-attached, connect the external cables to the back of the computer. External cable connections include: Monitor USB Keyboard Power Mouse Ethernet CAUTION : When attaching cables, never force a connection. NOTE : Plug in the power cable after you have connected all other cables.
  • 58.
    Connecting External CablesAttach the monitor cable to the video port. Secure the cable by tightening the screws on the connector. Plug the keyboard cable into the PS/2 keyboard port. Plug the mouse cable into the PS/2 mouse port. Plug the USB cable into a USB port. Plug the network cable into the network port. Connect the wireless antenna to the antenna connector. Plug the power cable into the power supply.
  • 59.
    3.9 Booting theComputer for the First Time The BIOS is a set of instructions stored in a nonvolatile memory chip. When the computer is booted, the basic input/output system ( BIOS ) will perform a power-on self test ( POST ) to check on all of the internal components. A special key or combination of keys on the keyboard is used to enter the BIOS setup program. The BIOS setup program displays information about all of the components in the computer.
  • 60.
    Identifying Beep CodesPOST checks to see that all of the hardware in the computer is operating correctly. If a device is malfunctioning, an error or a beep code alerts the technician that there is a problem. Typically, a single beep denotes that the computer is functioning properly. If there is a hardware problem, the computer may emit a series of beeps. Each BIOS manufacturer uses different codes to indicate hardware problems. Consult the motherboard documentation to view beep codes for your computer.
  • 61.
    BIOS Setup TheBIOS contains a setup program used to configure settings for hardware devices. The configuration data is saved to a special memory chip called a complementary metal-oxide semiconductor ( CMOS ). CMOS is maintained by the battery in the computer. If this battery dies, all BIOS setup configuration data will be lost. Replace the battery and reconfigure the BIOS settings.
  • 62.
    BIOS Setup ProgramBIOS settings are configured in the BIOS setup program.
  • 63.
    Entering the BIOSSetup Program CMOS determines what types of options are installed CMOS password can be configured to protect settings. If forgotten, use jumper on motherboard to reset or remove battery . System BIOS allows access to configuration information in CMOS setup utility proper key combination Registers are examined each time the system is booted up.
  • 64.
    Standard CMOS SetupScreen The standard CMOS setup screen includes the basic operating parameters that need to be set for the system to work correctly . Date / Time Hard Disks Boot Order Video
  • 65.
    BIOS Features andChipset Features Setup Screens
  • 66.
    Power Management andPlug and Play Screens
  • 67.
    Integrated Peripherals andFixed Disk Detection Screens
  • 68.
    Password Screens andthe Load Setup Defaults Screen
  • 69.
  • 70.
    Chapter 3 SummaryComputer Assembly Installation of all computer components Connection of all cables Description of BIOS Description of POST
  • 71.
    Additional Resources Whatis?com:IT Encyclopedia and Learning Center http://whatis.com TechTarget: The Most Targeted IT Media http://techtarget.com ZDNet: Tech News, Blogs and White Papers for IT Professionals http://www.zdnet.com HowStuffWorks: It's Good to Know http://computer.howstuffworks.com CNET.com http://www.cnet.com PC World http://www.pcworld.com ComputerWorld http://www.computerworld.com WIRED NEWS http://www.wired.com eWEEK.com http://www.eweek.com
  • 72.
    Let’s see whatyou have learned . . . Q : A technician is installing a new power supply in a computer. Which type of power connector should be used to connect to a PATA hard drive? A: Molex Q : A technician is installing a new power supply in a computer. Which type of power connector should be used to connect to a floppy drive? A: Berg Q : A technician is installing a new CPU in a ZIF socket on a motherboard. What is the primary way of securing the CPU in place? A: locking lever Q : What two components should be installed on a motherboard before it is mounted in the case? A: CPU and RAM
  • 73.
    Let’s see whatyou have learned . . . Q : Which solution should be used to clean a CPU and a heat sink? A: isopropyl alcohol Q : A technician is troubleshooting a computer that has a malfunctioning floppy drive. The technician observes that the floppy drive light remains lit constantly. How should the technician attempt to repair the problem? A: Connect the data cable making sure that the colored stripe on the cable is aligned with pin 1 on the drive and the motherboard Q : A sound card, a NIC, and a modem can be installed on which type of slots? A: PCI and PCIe Q : Which port is typically used for external wireless NICs? A: USB
  • 74.

Editor's Notes

  • #2 Cisco Networking Academy Program IT Essentials: PC Hardware and Software v4.0 Chapter 3: Computer Assembly
  • #3 Slide 3 - Chapter 3 Objectives The purpose of this chapter is to provide computer assembly instructions step-by-step. 3.1 Open the case 3.2 Install the power supply 3.3 Attach the components to the motherboard and install the motherboard 3.4 Install internal drives 3.5 Install drives in external bays 3.6 Install adapter cards 3.7 Connect all internal cables 3.8 Re-attach the side panels and connect external cables to the computer 3.9 Boot the computer for the first time
  • #4 Slide 4 – Chapter 3 Labs There are seven labs included in Chapter 3. These labs are available at the bottom of associated pages of course content. 3.2 Lab: Install the Power Supply (Install a power supply in a computer case.) 3.3.3 Lab: Install the Motherboard (Install a CPU, a heat sink/fan assembly, and a RAM module on the motherboard. Install the motherboard in the computer case.) 3.5.2 Lab: Install the Drives (Install the hard disk drive, the optical drive, and the floppy drive.) 3.6.3 Lab: Install Adapter Cards (Install a NIC, a wireless NIC, and a video adapter card.) 3.7.2 Lab: Install Internal Cables (Install the internal power and data cables in the computer.) 3.8.2 Lab: Complete the Computer Assembly (Install the side panels and the external cables on the computer.) 3.9.2 Lab: Boot the Computer (Boot the computer for the first time, explore the BIOS setup program, and change the boot order sequence.)
  • #5 Slide 5 – Optional Virtual Desktop Activities There are eight Optional Virtual Desktop activities for students to complete in Chapter 3. Each of these activities focuses on installing desktop components. Note: Instructors might add a reflection/sharing activity for students once they complete each of these activities. These Virtual Desktop activities are optional. System requirements for the virtual desktop include a minimum of 512MB RAM and Windows 2000 or XP operating system. 3.2 Virtual Desktop Power Supply (Complete the power supply layer in the virtual desktop.) 3.3.3 Virtual Desktop Motherboard (Install the motherboard assembly in the virtual desktop motherboard layer.) 3.4 Virtual Desktop Internal Drives (Install the hard drive in the virtual desktop internal drive layer.) 3.5.2 Virtual Desktop External Bay Drives (Install the drive in the virtual desktop external bay drive layer.) 3.6.3 Virtual Desktop Adapter Card (Install the adapter card in the virtual desktop adapter card layer.) 3.7.2 Virtual Desktop Internal Cables (Install the internal cable in the virtual desktop internal cable layer.) 3.8.2 Virtual Desktop External Cables (Install the external cable in the virtual desktop external cable layer.)
  • #6 Slide 6 – Introduction 3.0 Chapter Introduction Computer assembly is a large part of a technician's job. Work in a logical, methodical manner when working with computer components Improve computer assembly skills dramatically with practice After completing this chapter, students will meet these objectives: Open the case Install the power supply Install the motherboard and attach the components to the motherboard Install the internal drives Install the external drives Install the adapter cards in the appropriate slots Connect all internal cables Re-attach the side panels and connect external cables to the computer Boot the computer for the first time
  • #11 Slide 7 – Open the case 3.1 Open the case Computer cases are produced in a variety of form factors. Form factors refer to the size and shape of the case. Prepare the workspace before opening the computer case: There should be adequate lighting, good ventilation, and a comfortable room temperature. The workbench or table should be accessible from all sides. Avoid cluttering the surface with tools and computer components. An antistatic mat on the table will help prevent physical and ESD damage to equipment. Small containers can be used to hold screws and other small parts as they are being removed. There are different methods for opening cases. To learn how, consult the user manual or manufacturer's website. Some of the methods include the following: The computer case cover may be removed as one piece. The top and side panels of the case may be removed. The top of the case may need to be removed before the side panels can be removed.
  • #12 Slide 8 – Install the Power Supply 3.2 Install the power supply A technician may be required to replace or install a power supply. Most power supplies can only fit one way in the computer case. Power supplies have fans that can vibrate and loosen screws that are not secured. Power supply installation steps include the following: Insert the power supply into the case. Align the holes in the power supply with the holes in the case. Secure the power supply to the case using the proper screws. Student Activity: The student course content includes a lab, 3.2 Install the Power Supply. To complete this lab, students will install a power supply in a computer case. Optional Student Activity: The student course content includes the optional activity, 3.2 Virtual Desktop Power Supply. To complete this lab, students will complete the power supply layer in the virtual desktop. System requirements for the virtual desktop include a minimum of 512MB RAM and Windows 2000 or XP operating system.
  • #13 Slide 9 – Attach Components to the Motherboard 3.3 Attach the components to the motherboard and install the motherboard As part of an upgrade or repair, you may need to install components on the motherboard, and then install the motherboard into the computer case. After completing this section, students will meet these objectives: Install a CPU and a heat sink/fan assembly Install the RAM Install the motherboard
  • #14 Slide 10 –CPU on Motherboard 3.3.1 Install a CPU and a heat sink/fan assembly The CPU and the heat sink/fan assembly may be installed on the motherboard before the motherboard is placed in the computer case. The CPU and motherboard are sensitive to electrostatic discharge . When handling a CPU or motherboard, make sure that you place them on a grounded antistatic mat . You should also wear an antistatic wrist strap . CAUTION : When handling a CPU, do not touch the CPU contacts. The CPU is secured to the socket on the motherboard with a locking assembly. The CPU sockets today are ZIF sockets. You should be familiar with the locking assembly before attempting to install a CPU into the socket on the motherboard.
  • #17 Slide 11 – Thermal Compound 3.3.1 Install a CPU and a heat sink/fan assembly Thermal compound helps to keep the CPU cool. It is a substance that increases the transfer of heat from the CPU to the heat sink, where it can be dissipated. To install a used CPU, clean it and the base of the heat sink with isopropyl alcohol to remove the old thermal compound. Follow manufacturer’s recommendations about applying the thermal compound.
  • #18 Slide 12 – Heat Sink/Fan Assembly 3.3.1 Install a CPU and a heat sink/fan assembly The heat sink/fan assembly is a two-part cooling device. The heat sink draws heat away from the CPU. The fan moves the heat away from the heat sink. The heat sink/fan assembly usually has a 3-pin power connector.
  • #19 Slide 13 – Install Heat Sink/Fan Assembly 3.3.1 Install a CPU and a heat sink/fan assembly To install the CPU and heat sink/fan assembly: Align the CPU so that the Connection 1 indicator is lined up with Pin 1 on the CPU socket. Place the CPU gently into the socket. Close the CPU load plate and secure it by closing the load lever and moving it under the load lever retention tab. Apply a small amount of thermal compound to the CPU and spread it evenly. Follow the application instructions provided by the manufacturer. Line up the heat sink/fan assembly retainers to the holes on the motherboard. Place the heat sink/fan assembly onto the CPU socket, being careful not to pinch the CPU fan wires Tighten the heat sink/fan assembly retainers to secure the assembly in place Connect the heat sink/fan assembly power cable to the header on the motherboard
  • #20 Slide 14 – Install RAM 3.3.2 Install the RAM RAM provides temporary data storage for the CPU while the computer is operating. RAM is volatile memory and the contents are lost when the computer is shut down. Typically, adding more RAM will enhance the performance of your computer. RAM should be installed in the motherboard before the motherboard is placed in the computer case. Before you install a stick of RAM, consult the motherboard documentation or website of the manufacturer to ensure that the RAM is compatible with the motherboard. The following are RAM installation steps: Align the notches on the RAM module to the keys in the slot and press down until the side tabs click into place. Make sure that the side tabs have locked the RAM module and visually check for exposed contacts. Repeat these steps for additional RAM modules.
  • #21 Slide 15 – The Motherboard 3.3.3 Install the motherboard The motherboard is now ready to install in the computer case. Plastic and metal standoffs are used to mount the motherboard and to prevent it from touching the metal portions of the case. You should install only the standoffs that align with the holes in the motherboard. Installing any additional standoffs may prevent the motherboard from being seated properly in the computer case.
  • #23 Slide 16 – Install the Motherboard 3.3.3 Install the motherboard The following are motherboard installation steps: Install standoffs in the computer case. Align the I/O connectors on the back of the motherboard with the openings in the back of the case. Align the screw holes of the motherboard with the standoffs. Insert all of the motherboard screws. Tighten all of the motherboard screws. Student Activity: The student course content includes a lab, 3.3.3 Install the Motherboard. To complete this lab, students will install a CPU, a heat sink/fan assembly, and a RAM module on the motherboard. Install the motherboard in the computer case. Optional Student Activity: The student course content includes the optional activity, 3.3.3 Virtual Desktop Motherboard. To complete this lab, students will install the motherboard assembly in the virtual desktop motherboard layer. System requirements for the virtual desktop include a minimum of 512MB RAM and Windows 2000 or XP operating system.
  • #24 Slide 17 – Install Internal Drives 3.4 Install internal drives Drives that are installed in internal bays are called internal drives. A hard disk drive (HDD) is an example of an internal drive. The following are HDD installation steps: Position the HDD so that it aligns with the 3.5-inch drive bay. Insert the HDD into the drive bay so that the screw holes in the drive line up with the screw holes in the case. Secure the HDD to the case using the proper screws. Optional Student Activity: The student course content includes the optional activity, 3.4 Virtual Desktop Internal Drives. To complete this lab, students will install the hard drive in the virtual desktop internal drive layer. System requirements for the virtual desktop include a minimum of 512MB RAM and Windows 2000 or XP operating system.
  • #25 Slide 18 – Install External Drives 3.5 Install drives in external bays Drives, such as optical drives ( CD and DVD ) and floppy drives, are installed in drive bays that are accessed from the front of the case. Optical drives and floppy drives store data on removable media. Drives in external bays allow access to the media without opening the case. After completing this section, students will meet these objectives: Install the optical drive Install the floppy drive
  • #26 Slide 19 – Install the Optical Drive 3.5.1 Install the external drive An optical drive is a storage device that reads and writes information to CDs or DVDs. A Molex power connector provides the optical drive with power from the power supply. A PATA cable is used to connect the optical drive to the motherboard. The following are optical drive installation steps: Position the optical drive so that it aligns with the 5.25 inch drive bay. Insert the optical drive into the drive bay so that the optical drive screw holes align with the screw holes in the case. Secure the optical drive to the case using the proper screws.
  • #27 Slide 20 – Install the Floppy Drive 3.5.2 Install the floppy drive A floppy disk drive (FDD) is a storage device that reads and writes information to a floppy disk. A berg power connector provides the FDD with power from the power supply. A floppy data cable is used to connect the FDD to the motherboard. A floppy disk drive fits into the 3.5 inch bay on the front of the computer case. The following are FDD installation steps: Position the FDD so that it aligns with the 3.5 inch drive bay. Insert the FDD into the drive bay so that the FDD screw holes align with the screw holes in the case. Secure the FDD to the case using the proper screws. Student Activity: The student course content includes a lab, 3.5.2 Install the Drives. To complete this lab, students will install the hard disk drive, the optical drive, and the floppy drive. Optional Student Activity: The student course content includes the optional activity, 3.5.2 Virtual Desktop External Bay Drives. To complete this lab, students will install the drive in the virtual desktop external bay drive layer. System requirements for the virtual desktop include a minimum of 512MB RAM and Windows 2000 or XP operating system.
  • #30 Slide 21 – Install the Adapter Cards 3.6 Install adapter cards Adapter cards are installed to add functionality to a computer. Adapter cards must be compatible with the expansion slot. This section will focus on the installation of three types of adapter cards. PCIe x1 NIC PCI Wireless NIC PCIe x16 video adapter card After completing this section, students will meet these objectives: Install the NIC Install the wireless NIC Install the video adapter card
  • #31 Slide 22 – Install the Network Interface Card (NIC) 3.6.1 Install the NIC A NIC enables a computer to connect to a network. NICs use PCI and PCIe expansion slots on the motherboard. The following are NIC installation steps: Align the NIC to the appropriate slot on the motherboard. Press down gently on the NIC until the card is seated. Secure the NIC PC mounting bracket to the case with the appropriate screw.
  • #32 Slide 23 – Install the Wireless NIC 3.6.2 Install the wireless NIC A wireless NIC enables a computer to connect to a wireless network. Wireless NICs use PCI and PCIe expansion slots on the motherboard. Some wireless NICs are installed externally with a USB connector. You should handle a wireless NIC the same way that you handle an NIC. Make sure that you are using an antistatic wrist strap to prevent damage to the card. Always hold the card by the edges so that you do not damage components or leave moisture on the card. The following are wireless NIC installation steps: Align the wireless NIC to the appropriate expansion slot on the motherboard. Press down gently on the wireless NIC until the card is fully seated. Secure the wireless NIC PC mounting bracket to the case with the appropriate screw.
  • #33 Slide 24 – Install the Video Adapter Card 3.6.3 Install the video adapter card A video adapter card is the interface between a computer and a display monitor. An upgraded video adapter card can provide better graphic capabilities for games and graphic programs. Video adapter cards use PCI, AGP, and PCIe expansion slots on the motherboard. The following are video adapter card installation steps: Align the video adapter card to the appropriate expansion slot on the motherboard. Press down gently on the video adapter card until the card is fully seated. Secure the video adapter card PC mounting bracket to the case with the appropriate screw. Student Activity: The student course content includes a lab, 3.6.3 Install Adapter Cards. To complete this lab, students will install a NIC, a wireless NIC, and a video adapter card. Optional Student Activity: The student course content includes the optional activity, 3.6.3 Virtual Desktop Adapter Card. To complete this lab, students will install the adapter card in the virtual desktop adapter card layer. System requirements for the virtual desktop include a minimum of 512MB RAM and Windows 2000 or XP operating system.
  • #37 Slide 25 – Connect Internal Cables 3.7 Connect all internal cables Power cables are used to distribute electricity from the power supply to the motherboard and other components. Data cables transmit data between the motherboard and storage devices, such as hard drives. Additional cables connect the buttons and link lights on the front of the computer case to the motherboard. After completing this section, students will meet these objectives: Connect the power cables Connect the data cables
  • #38 Slide 26 – Connect Drive Power Cables 3.7.1 Connect the power cables Just like other components, motherboards require power to operate. The Advanced Technology Extended ( ATX ) main power connector will have either 20 or 24 pins. The power supply may also have a 4-pin or 6-pin Auxiliary ( AUX ) power connector that connects to the motherboard. A 20-pin connector will work in a motherboard with a 24-pin socket. The following are motherboard power cable installation steps: Align the 20-pin ATX power connector to the socket on the motherboard. Gently press down on the connector until the clip clicks into place. Align the 4-pin AUX power connector to the socket on the motherboard. Gently press down on the connector until the clip clicks into place.
  • #39 Slide 27 – Connect Power Cables 3.7.1 Connect the power cables SATA power connectors use a 15-pin connector. SATA power connectors are used to connect to hard disk drives, optical drives, or any devices that have a SATA power socket. Molex Power Connectors are used by hard disk drives and optical drives that do not have SATA power sockets. CAUTION : Do not use a Molex connector and a SATA power connector on the same drive at the same time. 4-pin Berg Power Connector supplies power to a floppy drive.
  • #40 Slide 28 – Power Connector Installation Steps 3.7.1 Connect the power cables The following are power connector installation steps: Plug the SATA power connector into the HDD. Plug the Molex power connector into the optical drive. Plug the 4-pin Berg power connector into the FDD. Connect the 3-pin fan power connector into the appropriate fan header on the motherboard, according to the motherboard manual. Plug the additional cables from the case into the appropriate connectors according to the motherboard manual.
  • #41 Slide 29 – PATA Cables 3.7.2 Connect the data cables Drives connect to the motherboard using data cables. Types of data cables are PATA, SATA, and floppy disk. The PATA cable is sometimes called a ribbon cable because it is wide and flat. The PATA cable can have either 40 or 80 conductors. A PATA cable usually has three 40-pin connectors. One connector at the end of the cable connects to the motherboard. The other two connectors connect to drives. If multiple hard drives are installed, the master drive will connect to the end connector. The slave drive will connect to the middle connector. A stripe on the data cable will denote Pin 1. Plug the PATA cable into the drive with the pin 1 indicator on the cable aligned to the pin 1 indicator on the drive connector. The pin 1 indicator on the drive connector is usually closest to the power connector on the drive. Many motherboards have two PATA drive controllers. This provides support for a maximum of four PATA drives.
  • #48 Slide 30 – SATA Cables 3.7.2 Connect the drive data cables The SATA data cable has a 7-pin connector. One end of the cable is connected to the motherboard. The other end is connected to any drive that has a SATA data connector.
  • #52 Slide 31 - Connect all Internal Cables 3.7.2 Connect the data cables The floppy drive data cable has a 34-pin connector. Like the PATA data cable, the floppy drive data cable has a stripe to denote the location of pin 1. A floppy drive cable usually has three 34-pin connectors. One connector at the end of the cable connects to the motherboard. The other two connectors connect to drives. If multiple floppy drives are installed, the A: drive will connect to the end connector. The B: drive will connect to the middle connector. Plug the floppy drive data cable into the drive with the pin 1 indicator on the cable aligned to the pin 1 indicator on the drive connector. Motherboards have one floppy drive controller which provides support for a maximum of two floppy drives. NOTE: If pin 1 on the floppy drive data cable is not aligned with pin 1 on the drive connector, the floppy drive will not function. This will not damage the drive, but the drive activity light will display continuously. To fix this problem, turn off the computer and re-connect the data cable so that the pin 1 on the cable and the pin 1 on the connector are aligned. Reboot the computer.
  • #53 Slide 32 – Install Data Cables 3.7.2 Connect the data cables The following are data cable installation steps: Plug the motherboard end of the PATA cable into the motherboard socket. Plug the connector at the far end of the PATA cable into the optical drive. Plug one end of the SATA cable into the motherboard socket. Plug the other end of the SATA cable into the HDD. Plug the motherboard end of the FDD cable into the motherboard socket. Plug the connector at the far end of the FDD cable into the floppy drive. Student Activity: The student course content includes a lab, 3.7.2 Install Internal Cables. To complete this lab, students will install the internal power and data cables in the computer. Optional Student Activity: The student course content includes the optional activity, 3.7.2 Virtual Desktop Internal Cables. To complete this lab, students will install the internal cable in the virtual desktop internal cable layer. System requirements for the virtual desktop include a minimum of 512MB RAM and Windows 2000 or XP operating system.
  • #56 Slide 33 – Re-attach Panels, Connect External Cables 3.8 Re-attach the side panels and connect external cables to the computer Now that all the internal components have been installed and connected to the motherboard and power supply, the side panels are re-attached to the computer case. The next step is to connect the cables for all computer peripherals and the power cable. After completing this section, students will meet these objectives: Re-attach the side panels to the case Connect external cables to the computer
  • #57 Slide 34 – Re-attach Side Panels 3.8.1 Re-attach the side panels to the case Most computer cases have two panels, one on each side. Some computer cases have one three-sided cover that slides down over the case frame. Once the cover is in place, make sure that it is secured at all screw locations. Some computer cases use screws that are inserted with a screwdriver. Other cases have knob-type screws that can be tightened by hand. Refer to the documentation or website of the manufacturer for more information if you are unsure about how to remove or replace the computer case CAUTION : Handle case parts with care. Some computer case covers have sharp or jagged edges.
  • #58 Slide 35 – Connect External Cables 3.8.2 Connect external cables to the computer After the case panels have been re-attached, connect the external cables to the back of the computer. Here are some common external cable connections: Monitor Keyboard Mouse USB Ethernet Power When attaching cables, ensure that they are connected to the correct locations on the computer. For example, some mouse and keyboard cables use the same type of PS/2 connector. CAUTION: When attaching cables, never force a connection. NOTE : Plug in the power cable after you have connected all other cables.
  • #59 Slide 36 – Connect External Cables 3.8.2 Connect external cables to the computer The following are external cable installation steps: Attach the monitor cable to the video port. Secure the cable by tightening the screws on the connector. Plug the keyboard cable into the PS/2 keyboard port. Plug the mouse cable into the PS/2 mouse port. Plug the USB cable into a USB port. Plug the network cable into the network port. Connect the wireless antenna to the antenna connector. Plug the power cable into the power supply. Student Activity: The student course content includes a lab, 3.8.2 Complete the Computer Assembly. To complete this lab, students will install the side panels and connect the external cables on the computer. Optional Student Activity: The student course content includes the optional activity, 3.8.2 Virtual Desktop External Cables. To complete this lab, students will install the external cable in the virtual desktop external cable layer. System requirements for the virtual desktop include a minimum of 512MB RAM and Windows 2000 or XP operating system.
  • #60 Slide 37 – Boot Computer for the First Time 3.9 Boot the computer for the first time When the computer is booted, the basic input/output system (BIOS) will perform a check on all of the internal components. This check is called a power-on self test (POST). The BIOS is a set of instructions stored in a nonvolatile memory chip. Nonvolatile means that the memory retains its contents even if the power is disconnected. A special key or combination of keys on the keyboard is used to enter the BIOS setup program. Most computers use the DEL key. Your computer may use another key or combination of keys. The BIOS setup program displays information about all of the components in the computer. The BIOS setup program is used to configure any settings that the computer components may have. The BIOS setup will allow you to modify settings that control how the computer will boot. After completing this section, students will meet these objectives: Identify beep codes Describe how to enter BIOS and use settings
  • #61 Slide 38 – Identify Beep Codes 3.9.1 Identify beep codes POST checks to see that all of the hardware in the computer is operating correctly. If a device is malfunctioning, an error or a beep code alerts the technician that there is a problem. Typically, a single beep denotes that the computer is functioning properly. If there is a hardware problem, the computer may emit a series of beeps. Each BIOS manufacturer uses different codes to indicate hardware problems. Consult the motherboard documentation to view beep codes for your computer.
  • #62 Slide 39 – BIOS Setup 3.9.2 Describe BIOS setup The BIOS contains a setup program used to configure settings for hardware devices. The configuration data is saved to a special memory chip called a complementary metal-oxide semiconductor (CMOS). CMOS is maintained by the battery in the computer. If this battery dies, all BIOS setup configuration data will be lost. Replace the battery and reconfigure the BIOS settings.
  • #63 Slide 40 – BIOS Setup Program 3.9.2 Describe BIOS setup BIOS settings are configured in the BIOS setup program. To enter this program, you must press the proper key or key sequence during POST. Most computers use the DEL key. Your computer may use another key or combination of keys. Here are some common BIOS setup menu options: Main - System time, date, HDD type, etc. Advanced - Infrared port settings, parallel port settings, etc. Security - Password settings to setup utility Others - Low battery alarm, system beep, etc. Boot - Sets the boot order of the computer Exit - Exits the setup utility Student Activity: The student course content includes a lab, 3.9.2 Boot the Computer. To complete this lab, students will boot the computer for the first time, explore the BIOS setup program, and change the boot order sequence.
  • #71 Slide 41 – Chapter 3 Summary Some of the important concepts to remember from this module:  Cases come in a variety of sizes and configurations. Many of the components of the computer must match the form factor of the case. The power supply changes AC voltage into DC voltage for the computer components to use. The CPU is installed on the motherboard with a heat sink/fan assembly. RAM is installed in RAM slots found on the motherboard. Adapter cards are installed in PCI and PCIe expansion slots found on the motherboard. Hard disk drives are installed in 3.5 inch drive bays located inside the case. Optical drives are installed in 5.25 inch drive bays that can be accessed from outside the case. Floppy drives are installed in 3.5 inch drive bays that can be accessed from outside the case. Power supply cables are connected to all drives and the motherboard. Internal data cables transfer data to all drives. External cables connect peripheral devices to the computer. Beep codes signify when hardware malfunctions. The BIOS setup program is used to display information about the computer components and allow the user to change system settings.
  • #72 Slide 49 – Additional Resources Whatis?com: IT Encyclopedia and Learning Center http://whatis.com TechTarget: The Most Targeted IT Media http://techtarget.com ZDNet: Tech News, Blogs and White Papers for IT Professionals http://www.zdnet.com HowStuffWorks: It's Good to Know http://computer.howstuffworks.com CNET.com http://www.cnet.com PC World http://www.pcworld.com ComputerWorld http://www.computerworld.com WIRED NEWS http://www.wired.com eWEEK.com http://www.eweek.com
  • #75 Slide 61 -