Nuclear Reactors for Space

(updated August 2012)

• Radioisotope power sources have been an important source of energy in space since 1961.
• Fission power sources have been used mainly by Russia, but new and more powerful designs are under development in the USA.

After a gap of several years, there is a revival of interest in the use of nuclear fission power for space missions.

While Russia has used over 30 fission reactors in space, the USA has flown only one - the SNAP-10A (System for Nuclear Auxiliary Power) in 1965.

Early on, from 1959-73 there was a US nuclear rocket program - Nuclear Engine for Rocket Vehicle Applications (NERVA) which was focused on nuclear power replacing chemical rockets for the latter stages of launches. NERVA used graphite-core reactors heating hydrogen and expelling it through a nozzle. Some 20 engines were tested in Nevada and yielded thrust up to more than half that of the space shuttle launchers. Since then, "nuclear rockets" have been about space propulsion, not launches. The successor to NERVA is today's nuclear thermal rocket (NTR).

Another early idea was the US Project Orion, which would launch a substantial spacecraft - about 1000 tonnes - from the earth using a series of small nuclear explosions to propel it. The project was commenced in 1958 by General Atomics and was aborted in 1963 when the Atmospheric Test Ban Treaty made it illegal, but radioactive fallout could have been a major problem. The Orion idea is still alive, as other means of generating the propulsive pulses are considered.

The United Nations has an Office for Outer Space Affairs (UNOOSA)* implements decisions of the Committee on the Peaceful Uses of Outer Space (COPUOS) set up in 1959 and now with 71 member states. UNOOSA recognises “that for some missions in outer space nuclear power sources are particularly suited or even essential owing to their compactness, long life and other attributes” and “that the use of nuclear power sources in outer space should focus on those applications which take advantage of the particular properties of nuclear power sources.” It has adopted a set of principles applicable “to nuclear power sources in outer space devoted to the generation of electric power on board space objects for non-propulsive purposes,” including both radioisotope systems and fission reactors.

*UNOOSA has the dual objective of supporting the intergovernmental discussions in the Committee and its Scientific and Technical Subcommittee (S&T) and Legal Subcommittee, and of assisting developing countries in using space technology for development. In addition, it follows legal, scientific and technical developments relating to space activities, technology and applications in order to provide technical information and advice to Member States, international organizations and other United Nations offices.

Radioisotope systems - RTGs 

So far, radioisotope thermoelectric generators (RTGs) have been the main power source for US space work over nearly 50 years, since 1961. The high decay heat of Plutonium-238 (0.56 W/g) enables its use as an electricity source in the RTGs of spacecraft, satellites, navigation beacons, etc and its alpha decay process calls for minimal shielding.   Heat from the oxide fuel is converted to electricity through static thermoelectric elements (solid-state thermocouples), with no moving parts. RTGs are safe, reliable and maintenance-free and can provide heat or electricity for decades under very harsh conditions, particularly where solar power is not feasible.

So far 45 RTGs have powered 25 US space vehicles including Apollo, Pioneer, Viking, Voyager, Galileo, Ulysses and New Horizons space missions as well as many civil and military satellites. The Cassini spacecraft carries three RTGs providing 870 watts of power as it explores Saturn. Voyager spacecraft which have sent back pictures of distant planets have already operated for over 20 years and are expected to send back signals powered by their RTGs for another 15-25 years. Galileo, launched in 1989, carried a 570-watt RTG.  The Viking and Rover landers on Mars in 1975 depended on RTG power sources, as will the Mars Science Laboratory Rover launched in 2011 (the two Mars Rovers operating 2004-09 use solar panels and batteries).

The latest RTG is a 290-watt system known as the GPHS RTG. The thermal power for this system is from 18 General Purpose Heat Source (GPHS) units. Each GPHS contains four iridium-clad ceramic Pu-238 fuel pellets, stands 5 cm tall, 10 cm square and weighs 1.44 kg.  The Multi-Mission RTG (MMRTG) will use 8 GPHS units with a total of 4.8 kg of plutonium oxide producing 2 kW thermal which can be used to generate some 110 watts of electric power, 2.7 kWh/day.  It is being used in the Mars Science Laboratory, a large mobile laboratory - the rover Curiosity, which at 890 kg is about five times the mass of previous Mars rovers.

The Stirling Radioisotope Generator (SRG) is based on a 55-watt electric converter powered by one GPHS unit. The hot end of the Stirling converter reaches 650°C and heated helium drives a free piston reciprocating in a linear alternator, heat being rejected at the cold end of the engine. The AC is then converted to 55 watts DC. This Stirling engine produces about four times as much electric power from the plutonium fuel than an RTG. Thus each SRG will utilise two Stirling converter units with about 500 watts of thermal power supplied by two GPHS units and will deliver 100-140 watts of electric power from about 1 kg Pu-238. The SRG and Advanced SRG have been extensively tested but has not yet flown.  NASA plans to use two ASRGs for its probe to Saturn's moon Titan (Titan Mare Explorer - TiME) or that to the comet Wirtanen.

Russia has developed RTGs using Po-210, two are still in orbit on 1965 Cosmos navigation satellites. But it concentrated on fission reactors for space power systems.

As well as RTGs, Radioactive Heater Units (RHUs) are used on satellites and spacecraft to keep instruments warm enough to function efficiently. Their output is only about one watt and they mostly use Pu-238 - typically about 2.7g of it. Dimensions are about 3 cm long and 2.5 cm diameter, weighing 40 grams. Some 240 have been used so far by USA and two are in shut-down Russian Lunar Rovers on the moon. Eight were installed on each of the US Mars Rovers Spirit and Opportunity, which landed in 2004, to keep the batteries functional.

The Idaho National Laboratory's (INL) Centre for Space Nuclear Research (CSNR) in collaboration with NASA is developing an RTG-powered hopper vehicle for Mars exploration. When stationary the vehicle would study the area around it while slowly sucking up carbon dioxide from the atmosphere and freezing it, after compression by a Stirling engine. Meanwhile a beryllium core would store heat energy required for the explosive vaporisation needed for the next hop. When ready for the next hop, nuclear heat would rapidly vaporise the carbon dioxide, creating a powerful jet to propel the craft up to 1000 metres into the 'air'. A small hopper could cover 15 km at a time, repeating this every few days over a ten-year period. Hoppers could carry payloads of up to 200 kg and explore areas inaccessible to the Rovers. INL suggests that a few dozen hoppers could map the Martian surface in a few years, and possibly convey rock samples from all over the Martian surface to a craft that would bring them to Earth.

Both RTGs and RHUs are designed to survive major launch and re-entry accidents intact, as is the SRG.

Fission systems - heat

For power requirements over 100 kWe, fission systems have a distinct cost advantage over RTGs.

The US SNAP-10A launched in 1965 was a 45 kWt thermal nuclear fission reactor which produced 650 watts using a thermoelectric converter and operated for 43 days but was shut down due to a voltage regulator (not reactor) malfunction. It remains in orbit.

The last US space reactor initiative was a joint NASA-DOE-Defence Dept program developing the SP-100 reactor - a 2 MWt fast reactor unit and thermoelectric system delivering up to 100 kWe as a multi-use power supply for orbiting missions or as a lunar/Martian surface power station. This was terminated in the early 1990s after absorbing nearly $1 billion. The reactor used uranium nitride fuel and was lithium-cooled.

There was also a Timberwind pebble bed reactor concept under the Defence Dept Multi-Megawatt (MMW) space power program during the late 1980s, in collaboration with DOE. This had power requirements well beyond any civil space program.

Between 1967 and 1988 the former Soviet Union launched 31 low-powered fission reactors in Radar Ocean Reconnaissance Satellites (RORSATs) on Cosmos missions. They utilised thermoelectric converters to produce electricity, as with the RTGs. Romashka reactors were their initial nuclear power source, a fast spectrum graphite reactor with 90%-enriched uranium carbide fuel operating at high temperature. Then the Bouk fast reactor produced 3 kW for up to 4 months. Later reactors, such as on Cosmos-954 which re-entered over Canada in 1978, had U-Mo fuel rods and a layout similar to the US heatpipe reactors described below.

These were followed by the Topaz reactors with thermionic conversion systems, generating about 5 kWe of electricity for on-board uses. This was a US idea developed during the 1960s in Russia. In Topaz-2 each fuel pin (96% enriched UO₂) sheathed in an emitter is surrounded by a collector and these form the 37 fuel elements which penetrate the cylindrical ZrH moderator. This in turn is surrounded by a beryllium neutron reflector with 12 rotating control drums in it. NaK coolant surrounds each fuel element.

Topaz-1 was flown in 1987 on Cosmos 1818 & 1867. It was capable of delivering power for 3-5 years for ocean surveillance. Later Topaz were aiming for 40 kWe via an international project undertaken largely in the USA from 1990. Two Topaz-2 reactors (without fuel) were sold to the USA in 1992. Budget restrictions in 1993 forced cancellation of a Nuclear Electric Propulsion Spaceflight Test Program associated with this.

Development of a small fission surface power system for the moon and Mars was announced by NASA in 2008.  The 40 kWe system could utilise one of two design concepts for power conversion: The first, by Sunpower Inc., of Athens, Ohio, uses two opposed piston engines coupled to alternators that produce 6 kilowatts each, or a total of 12 kilowatts of power. The second, by Barber Nichols Inc. of Arvada, Colorado, is for development of a closed Brayton cycle engine that uses a high-speed turbine and compressor coupled to a rotary alternator that also generates 12 kilowatts of power.  NASA itself will develop the heat rejection system and provide the space simulation facility.  In mid 2012 NASA reported successful tests of power conversion and radiator components of this 40 kWe system, which is based on a small fission reactor heating up and circulating a liquid metal coolant mixture of sodium and potassium. The heat differential between this and the outside temperature would drive two complementary Stirling engines to turn a 40 kWe generator. Some 100 square metres of radiators would remove process heat to space.

Fission systems - space propulsion

For spacecraft propulsion, once launched, some experience has been gained with nuclear thermal propulsion systems (NTR) which are said to be well developed and proven. Nuclear fission heats a hydrogen propellant which is stored as liquid in cooled tanks. The hot gas (about 2500°C) is expelled through a nozzle to give thrust (which may be augmented by injection of liquid oxygen into the supersonic hydrogen exhaust). This is more efficient than chemical reactions. Bimodal versions will run electrical systems on board a spacecraft, including powerful radars, as well as providing propulsion. Compared with nuclear electric plasma systems, these have much more thrust for shorter periods and can be used for launches and landings.

However, attention is now turning to nuclear electric systems, where nuclear reactors are a heat source for electric ion drives expelling plasma out of a nozzle to propel spacecraft already in space. Superconducting magnetic cells ionise hydrogen or xenon, heat it to extremely high temperatures (millions °C), accelerate it and expel it at very high velocity (eg 30 km/sec) to provide thrust.

Research for one version, the Variable Specific Impulse Magnetoplasma Rocket (VASIMR) draws on that for magnetically-confined fusion power (tokamak) for electricity generation, but here the plasma is deliberately leaked to give thrust. The system works most efficiently at low thrust (which can be sustained), with small plasma flow, but high thrust operation is possible. It is very efficient, with 99% conversion of electric to kinetic energy.

Heatpipe Power System (HPS) reactors are compact fast reactors producing up to 100 kWe for about ten years to power a spacecraft or planetary surface vehicle. They have been developed since 1994 at the Los Alamos National Laboratory as a robust and low technical risk system with an emphasis on high reliability and safety. They employ heatpipes to transfer energy from the reactor core to make electricity using Stirling or Brayton cycle converters.

Energy from fission is conducted from the fuel pins to the heatpipes filled with sodium vapour which carry it to the heat exchangers and thence in hot gas to the power conversion systems to make electricity. The gas is 72% helium and 28% xenon.

The reactor itself contains a number of heatpipe modules with the fuel. Each module has its central heatpipe with rhenium-clad fuel sleeves arranged around it. They are the same diameter and contain 97% enriched uranium nitride fuel, all within the cladding of the module. The modules form a compact hexagonal core.

Control is by six stainless steel clad beryllium drums each 11 or 13 cm diameter with boron carbide forming a 120 degree arc on each. The drums fit within the six sections of the beryllium radial neutron reflector surrounding the core, and rotate to effect control, moving the boron carbide in or out.

Shielding is dependent on the mission or application, but lithium hydride in stainless steel cans is the main neutron shielding.

The SAFE-400 space fission reactor (Safe Affordable Fission Engine) is a 400 kWt HPS producing 100 kWe to power a space vehicle using two Brayton power systems - gas turbines driven directly by the hot gas from the reactor. Heat exchanger outlet temperature is 880°C. The reactor has 127 identical heatpipe modules made of molybdenum, or niobium with 1% zirconium. Each has three fuel pins 1 cm diameter, nesting together into a compact hexagonal core 25 cm across. The fuel pins are 70 cm long (fuelled length 56 cm), the total heatpipe length is 145 cm, extending 75 cm above the core, where they are coupled with the heat exchangers. The core with reflector has a 51 cm diameter. The mass of the core is about 512 kg and each heat exchanger is 72 kg.

SAFE has also been tested with an electric ion drive.

A smaller version of this kind of reactor is the HOMER-15 - the Heatpipe-Operated Mars Exploration Reactor. It is a15 kW thermal unit similar to the larger SAFE model, and stands 2.4 metres tall including its heat exchanger and 3 kWe Stirling engine (see above). It operates at only 600°C and is therefore able to use stainless steel for fuel pins and heatpipes, which are 1.6 cm diameter. It has 19 sodium heatpipe modules with 102 fuel pins bonded to them, 4 or 6 per pipe, and holding a total of 72 kg of fuel. The heatpipes are 106 cm long and fuel height 36 cm. The core is hexagonal (18 cm across) with six BeO pins in the corners. Total mass of reactor system is 214 kg, and diameter is 41 cm.

Space Reactor Power Systems

In the 1980s the French ERATO program considered three 20 kWe turboelectric power systems for space. All used a Brayton cycle converter with a helium-xenon mix as working fluid. The first system was a sodium-cooled UO₂ -fuelled fast reactor operating at 670°C, the second a high-temperature gas-cooled reactor (thermal or epithermal neutron spectrum) working at 840°C, the third a lithium-cooled UN-fuelled fast reactor working at 1150°C. 

In 2010 the Russian government was to allocate RUR500 million (about US$170 million) of federal funds to design a space nuclear propulsion and generation installation in the megawatt power range. In particular, SC Rosatom is to get RUR 430 million and Roskosmos (Russian Federal Space Agency) RUR 70 million to develop it. The work will be undertaken by N.A. Dollezhal NIKIET (Research & Development Institute for Power Engineering) in Moscow, based on previous developments including those of nuclear rocket engines, but beyond that the design envisaged is not known.   Russia's Energia space corporation started work in 2011 on standardized space modules with nuclear-powered propulsion systems, initially involving 150 to 500 kilowatt systems. A conceptual design in 2011 is being followed by the basic design documentation and engineering design. The idea now being pursued by Russia's Keldysh Research Centre is to use a small gas-cooled fission reactor aboard the rocket to turn a turbine and generator set and thereby produce electricity for a plasma thruster. The reactor unit should be developed about 2015, then life-service tests are planned for 2018. The first launches, are envisaged for about 2020.

The Director of Roskosmos says that development of megawatt-class nuclear space power systems for manned spacecraft is crucial if Russia wants to maintain a competitive edge in the space race, including the exploration of the moon and Mars. The project will require funding of some RUR 17 billion ($540 million). Energia earlier said that it is ready to design a space-based nuclear power station with a service life of 10-15 years, to be initially placed on the moon or Mars. It is also working on a concept of a nuclear-powered space tug, which could be used for launching satellites. 

Project Prometheus 2003

In 2002 NASA announced its Nuclear Systems Initiative for space projects, and in 2003 this was renamed Project Prometheus and given increased funding. Its purpose was to enable a major step change in the capability of space missions. Nuclear-powered space travel will be much faster than is now possible, and will enable manned missions to Mars.

One part of Prometheus, which is a NASA project with substantial involvement by DOE in the nuclear area, was to develop the Multi-Mission Thermoelectric Generator and the Stirling Radioisotope Generator described in the RTG section above.

A more radical objective of Prometheus was to produce a space fission reactor system such as those described above for both power and propulsion that would be safe to launch and which would operate for many years with much greater power than RTGs.  Power of 100 kW is envisaged for a nuclear electric propulsion system driven by plasma.

The FY 2004 budget proposal was $279 million, with $3 billion to be spent over five years. This consists of $186 million ($1 billion over 5 years) building on FY 2003 allocation plus $93 million ($2 billion over five years) towards a first flight mission to Jupiter - the Jupiter Icy Moon Orbiter, expected to launch in 2017 and explore for a decade. However, Project Prometheus received only $430 million in 2005 budget and this shrank to $100 million in 2006, most of which was to compensate for cancelled contracts, so it is effectively on hold.

In 2003 Project Prometheus successfully tested a High Power Electric Propulsion (HiPEP) ion engine. This operates by ionizing xenon with microwaves. At the rear of the engine is a pair of rectangular metal grids that are charged with 6,000 volts of electric potential. The force of this electric field exerts a strong electrostatic pull on the xenon ions, accelerating them and producing the thrust that propels the spacecraft. The test was at up to 12 kW, though twice that is envisaged. The thruster is designed for a 7 to 10-year lifetime with high fuel efficiency, and to be powered by a small nuclear reactor.

Sources:
Poston, D.I. 2002, Nuclear design of SAFE-400 space fission reactor, Nuclear News, Dec 2001.
Poston, D.I. 2002, Nuclear design of HOMER-15 Mars surface fission reactor, Nuclear News, Dec 2001.
Vrillon et al, 1990, ERATO article, Nuclear Europe Worldscan 11-12, 1990.
US DOE web site- space applications.
space.com 21/5/00, 16/6/00, 22/7/00, 17/1/03, 7/2/03.
www.nuclearspace.com
Delovy Mir 8/12/95.
G. Kulcinski, University of Wisconsin material on web.
Kleiner K. 2003, Fission Control, New Scientist 12/4/03.

OECD 1990, Emergency Preparedness for Nuclear-Powered Satellites.

NASA web site