PRYME BLU BT-503 Motorola Headset Bluetooth AdapterBT503 PRYME BLU BLUETOOTH ADAPTER FOR MOTOROLA COMPATIBLE TWO WAY RADIOS The PRYME BLU Adapter BT-503 allows you to use a compatible wireless Bluetooth headset or other audio accessory with your two-way radio. The PRYME BLU Adapter is compatible with thousands of off the shelf consumer audio accessories and pairs easily, allowing you to operate wirelessly. If you have a Dual Sync Bluetooth headset (we sell them - hint hint) you can pair your Motorola two way radio and your cell phone with same headset so you will never miss a call or a broadcast again... the ultimate in multi tasking. The Talk button on the PRYME BLU Adapter will function as a Push-to-Talk button for your two-way radio once a wireless audio accessory is successfully paired to the adapter. The PRYMEBLU Adapter is supplied with a rubber Friction Pad. This pad provides additional protection and stability when using the Velcro Fastener to attach the adapter to a radio or other location. The BT-503 PRYMEBLU Adapter has an internal Lithium Ion rechargeable battery pack which must be charged prior to operation, and must be recharged regularly. A fully charged battery will provide approximately 10 hours (or more) of operation before needing to be recharged, however, operating time can vary depending on usage and the condition of the battery pack. Recharge the battery regularly. Multifunction Talk Switch Used to place the PRYME BLU Adapter in pairing mode. Once paired with an audio accessory, this switch is used to activate the Push-To-Talk function of the two-way radio. A Velcro Fastener is Used to attach the PRYMEBLU adapter to the two-way radio or to the user’s belt or lapel. The LED flashes messages that let the user know the current status of the PRYMEBLU Adapter. Once your PRYMEBLU Adapter and wireless Bluetooth headset have been paired together you will be able to monitor received signals that will be heard over your Bluetooth headset’s speaker. When transmitting, the operator’s voice is picked-up by the microphone in the Bluetooth headset. The Push-to-Talk can be activated by pressing and holding the Talk button on the PRYME BLU Adapter or by using an optional PRYMEBLU Wireless Bluetooth PTT (model BT-PTT, sold separately). • Allows uses of Bluetooth wireless audio accessory with your two-way radio.• Compatible with thousands of readily available Bluetooth headsets and other audio accessories. • Easy pairing process. Store paired connections to the wireless headsets even if the powered off or removed from the two-way radio.• RX and TX audio is automatically routed to the two-way radio or the appropriate wireless audio accessory depending on what accessories are connected to the PRYMEBLU adapter.• Status LED indicates connection to a compatible wireless accessory.• Maximum Range Approximately 10meters (33 feet)• Bluetooth Version 2.1 (can pair multiple devices - depending on your headset).• Bluetooth Compliance: Bluetooth Audio Accessories with version 1.1 or higher.• Operating Temperature Range -20C to 75C• Storage Temperature Range -40C to 150C• A simple pin model that has an internal Li-Ion battery pack and must be recharged between uses.• Allows you to use a wireless Bluetooth headset with your two-way radio in place of a speaker microphone or wired audio accessory. BT-503 WORKS WITH THESE MOTOROLA MODELS: AXU4100, AXV5100, BPR40, CLS1110, CLS1410, CLS1413, CLS1450C, CLS1453C, CP100, CP110, CP150, CP185, CP200, CP88, CT125, CT150, CT250, CT450, CT450LS, DTR, DTR410, DTR550, DTR650, GP200, GP2000, GP300, GP308, GP68, GP88, GTI, GTX, LTS2000, P040, P080, P110, P1225, P1225LS, P200, P2000, PR400, RDK, RDU, RDU2020, RDU2080D, RDU4100, RDU4160D, RDV, RDV2020, RDV2080D, RDV5100, SP10, SP21, SP50, VL50, XTN, XTN446, XTN500, XTN600, XU1100, XU2100, XU2600, XV1100, XV2100, XV2600 PRYME BLU BT-503 MOTOROLA BLUETOOTH HEADSET ADAPTER OWNERS MANUAL
$119.98
