A custom Home Assistant integration for Intelbras AMT alarm systems using the native 0xe7 protocol.

✅ Installation Note: This integration can be installed through HACS (Home Assistant Community Store) or manually. It provides direct communication with your alarm panel using the same protocol as the official Android app.

• Direct Control: Arm/disarm your alarm system with immediate status updates
• Real-time Status: Live monitoring of armed/disarmed state with instant feedback
• PGM Output Control: Control programmable outputs (PGM 1-4) through switch entities
• System Monitoring: Binary sensors for connection status, alarm state, and system problems
• Native Protocol: Direct communication using reverse-engineered 0xe7 protocol (same as Android app)
• Local Network: No cloud dependency, direct panel communication over TCP
• Professional Testing: Extensively tested with real AMT 1016 NET hardware
• Device Information: View panel details and connection status
• Session Management: Proper authentication, logout, and connection handling

• Supported Models: AMT 1016 NET, AMT 2018 NET, and other AMT series panels
• Network Access: Your alarm panel must be connected to your local network
• Hex Password: You'll need your panel's password (4-6 digits, e.g., "1234", "878787")

This integration can be installed through HACS as a custom repository:

1. Add Custom Repository:

   • Open HACS → Integrations
   • Click ⋮ menu → Custom repositories
   • Add: https://github.com/intelbras-community/ha-intelbras-alarm
   • Category: Integration

2. Install Integration:

   • Search for "Intelbras Alarm"
   • Click "Download" and restart Home Assistant

3. Configure Integration:

   • Go to Settings → Devices & Services → Add Integration
   • Search for "Intelbras Alarm" and select it
   • Enter your panel's IP address and hex password

If you prefer to install manually:

1. Download the latest release from GitHub Releases
2. Extract the custom_components/intelbras_alarm folder to your Home Assistant custom_components directory
   • Your path should look like: config/custom_components/intelbras_alarm/
3. Restart Home Assistant
4. Go to Settings → Devices & Services → Add Integration
5. Search for "Intelbras Alarm" and select it
6. Enter your panel's IP address and hex password

1. Navigate to Settings → Devices & Services
2. Click the + button to add a new integration
3. Search for "Intelbras Alarm"
4. Enter your connection details:
   • Panel IP Address: Your alarm panel's local network IP (e.g., 192.168.0.100)
   • Password: Your panel's hex password (4-6 digits, same as used in Android app)
   • Port: TCP port (default: 9009)

This integration supports configuration through the UI only. Manual YAML configuration is not supported.

The integration creates an alarm control panel entity that provides:

• Arm/Disarm Control: Toggle your alarm system's armed state
• Status Monitoring: Real-time display of current alarm state
• Device Information: Panel details including IP, MAC address, and model

Additional binary sensors provide monitoring capabilities:

• Connection Status: Monitor panel connectivity (binary_sensor.panel_connection)
• Alarm Status: Current alarm state (binary_sensor.panel_alarm)
• System Problems: Alert for system issues (binary_sensor.panel_problems)

Control programmable outputs through switch entities:

• PGM 1-4: Toggle programmable outputs (switch.panel_pgm_1, etc.)
• Real-time Status: Shows current state of each PGM output
• Device Control: Same functionality as the Android app's PGM controls

Additional sensors provide detailed monitoring information:

• System Status: Overall alarm system state (sensor.panel_system_status)
• Active Zones: Count of active zones (sensor.panel_active_zones)
• Last Update: Timestamp of most recent status update (sensor.panel_last_update)