Basic support has been added for v3.0.27. Additional features need to be added for full v3 functionality. But, the basics should work for a single client that is connected to the radio. I need to resolve some local network issues on my end to fully develop and test multiple clients and Smartlink but I hope to do this in the near future.

This is a Powershell module for FlexRadio 6000 series amateur radios. Note that this project is NOT maintained by FlexRadio Systems.

More information about FlexRadio can be found on their website: [http://www.flexradio.com]

To install -- Clone this repo to an appropriate Modules folder in Powershell, for example, in your Documents\WindowsPowerShell\Modules\FlexModule folder, or if you are using the newer Powershell Core, Documents\PowerShell\Modules\FlexModule.

If this is your first time running scripts in Powershell, you may also need to launch a Powershell session as Administrator (Right click the Powershell icon, select "Run as administrator") and then type Set-ExecutionPolicy RemoteSigned. This will open up the security settings a little on your computer so that you can run scripts.

If you're running a recent version of Powershell, just run Get-FlexRadio and it should show your FlexRadio 6000 series radio. Run Connect-FlexRadio to connect to it. If you are operating remotely, you will need to first connect to SmartLink by running Connect-FlexSmartLink. If you haven't configured SmartLink yet, please do so using SmartSDR.

PS C:\> Get-FlexRadio

Model           Serial                    IP                   Connected  Callsign
-----           ------                    --                   ---------  --------
FLEX-6700       4213-3107-6700-8545       192.168.1.155        False      KI4TTZ

PS C:\> Connect-FlexRadio

Model           Serial                    IP                   Connected  Callsign
-----           ------                    --                   ---------  --------
FLEX-6700       4213-3107-6700-8545       192.168.1.155        True       KI4TTZ

PS C:\>

Changing the RF Power:

PS C:\> Get-FlexRadio | select *power*

MaxPowerLevel RFPower TunePower TXRFPowerChangesAllowed
------------- ------- --------- -----------------------
          100      15        10                    True

PS C:\> Get-FlexRadio | Set-FlexRadio -RFPower 100
PS C:\> Get-FlexRadio | select *power*

MaxPowerLevel RFPower TunePower TXRFPowerChangesAllowed
------------- ------- --------- -----------------------
          100     100        10                    True

PS C:\>

Changing the frequency of the active slice receiver:

PS C:\> Get-FlexSliceReceiver -Active

Index           Active                    RXAnt                TXAnt      Freq
-----           ------                    -----                -----      ----
0               True                      RX_A                 ANT1       7.1301

PS C:\> Get-FlexSliceReceiver -Active | Set-FlexSliceReceiver -Freq "7.127"

Confirm
Are you sure you want to perform this action?
Performing the operation "Modify Freq on Slice #0" on target "4213-3107-6700-8545".
[Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"): y
PS C:\>

To see all of the cmdlets available in this module, run Get-FlexCommand. The commands currently available are:

• Connect-FlexRadio
• Connect-FlexSmartLink
• Disable-FlexLog
• Disable-FlexTNF
• Disconnect-FlexRadio
• Enable-FlexLog
• Enable-FlexTNF
• Export-FlexDatabase
• Get-FlexCommand
• Get-FlexLatestFolderPath
• Get-FlexLibPath
• Get-FlexLog
• Get-FlexMemory
• Get-FlexPacket
• Get-FlexPanadapter
• Get-FlexProfile
• Get-FlexRadio
• Get-FlexSliceReceiver
• Get-FlexVersion
• Import-FlexLib
• Install-FlexGPS
• New-FlexMemory
• New-FlexSliceReceiver
• Remove-FlexMemory
• Remove-FlexPanadapter
• Remove-FlexSliceReceiver
• Restart-FlexRadio
• Select-FlexMemory
• Set-FlexMemory
• Set-FlexPanadapter
• Set-FlexRadio
• Set-FlexSliceReceiver
• Start-FlexScreenSaver
• Uninstall-FlexGPS

If you have questions, feel free to ask (rfoust at gmail.com).

Enjoy!

73,

-Robbie KI4TTZ